no start need ideas

Discussion in 'Engine/Drivetrain' started by sleepingciv, May 28, 2010.

  1. IronNam

    IronNam Grand Toyotaholic

    Joined:
    Sep 11, 2008
    Messages:
    6,960
    Likes Received:
    14
    Location:
    Kansas -> NorCal
    Truck:
    94 XCab
    Damn, good luck sir. I say just check all grounds over, even little obvious things can always be left out
     
  2. sleepingciv

    sleepingciv Enthusiast

    Joined:
    May 26, 2010
    Messages:
    118
    Likes Received:
    0
    thanks i cleaned the hell outta the grounds with a file lol they look new




    ok i finally got a real test light and my brother hasnt shown up yet with the meter


    but can someone confirm this for me? like going now and check in there truck lol
    this is the efi relay with the key on i have power to the 2 circled in red not the other 2
    also the 2 wire plug that plugs right into the coil.
    when unplugged the white wire only has power, plug it in and both have power
    [​IMG]
     
  3. tron93

    tron93 Enthusiast

    Joined:
    Apr 13, 2009
    Messages:
    130
    Likes Received:
    0
    Location:
    Orlando FL
    Truck:
    93 xcab
    Correct- just checked my 93.
     
  4. sleepingciv

    sleepingciv Enthusiast

    Joined:
    May 26, 2010
    Messages:
    118
    Likes Received:
    0
    thank you good sir
     
  5. sleepingciv

    sleepingciv Enthusiast

    Joined:
    May 26, 2010
    Messages:
    118
    Likes Received:
    0
    ok i just went threw my harness were i cut and had soldered wires. i had left then lables on them after i was done.

    and there all connected and lable to lable


    wtf am i missing guys>>


    and the coil has a a neg and power right?
     
  6. sleepingciv

    sleepingciv Enthusiast

    Joined:
    May 26, 2010
    Messages:
    118
    Likes Received:
    0
    ok the red arrow i have ower coming in.
    1 has power going into the coil
    2 has power also but why it shouldnt right?

    when 1 and 2 are unplugged from the coil only 1 as power.

    WTF come on guys
    [​IMG]
     
  7. sleepingciv

    sleepingciv Enthusiast

    Joined:
    May 26, 2010
    Messages:
    118
    Likes Received:
    0
    finally got a freaking multi meter


    anyway

    primary coil had .6 ohms
    and the secondary didnt do sqwat

    and the pick up had 229


    can the coil just go bad?????
     

Share This Page