1992 Toyota pickup

Discussion in 'Introduce Yourself' started by Elihu Quintanilla, Mar 16, 2020.

  1. Elihu Quintanilla

    Elihu Quintanilla Newbie

    Joined:
    Mar 15, 2020
    Messages:
    13
    Likes Received:
    1
    New member from Las Vegas Nevada
    After looking for months for a clean truck with minimal issues with the right price. I’ve finally found it. Some background on the truck. I’m the third owner of this truck. It has no rust, no body damage except for the emblem on the grill is gone. All stock, with dealer maintenance records from year 2000. I have some big plans for it and am ready to get started.
     

    Attached Files:

    Last edited: Mar 16, 2020
  2. jetas

    jetas Grand Toyotaholic

    Joined:
    Mar 26, 2009
    Messages:
    6,655
    Likes Received:
    1,091
    Location:
    Oxnard, CA
    Truck:
    72.5 Hilux
    Welcome to TM! Very clean truck
     
    Elihu Quintanilla likes this.
  3. Elihu Quintanilla

    Elihu Quintanilla Newbie

    Joined:
    Mar 15, 2020
    Messages:
    13
    Likes Received:
    1
    Lowered the truck today. Used the Belltech drop spindles and 3in blocks
    Still needs lowers and more clearance. Maybe need c notch and low profile bump stops
     

    Attached Files:

  4. jetas

    jetas Grand Toyotaholic

    Joined:
    Mar 26, 2009
    Messages:
    6,655
    Likes Received:
    1,091
    Location:
    Oxnard, CA
    Truck:
    72.5 Hilux
    Il suggest smaller tires, and summit racing has the low profile bump stops
     
    Elihu Quintanilla likes this.
  5. Elihu Quintanilla

    Elihu Quintanilla Newbie

    Joined:
    Mar 15, 2020
    Messages:
    13
    Likes Received:
    1
    Changed wheels and tires. 195/40:16 in the front, and 205/40/16 in the rear. I’m gonna switch to a4in block in the rear and maybe djm lca it says 3in drop so that’ll put me at 6. Then I can adjust the torsion to a little stiffer for better handling
     

    Attached Files:

  6. Elihu Quintanilla

    Elihu Quintanilla Newbie

    Joined:
    Mar 15, 2020
    Messages:
    13
    Likes Received:
    1
    Also I removed the purple tint
     

    Attached Files:

  7. Elihu Quintanilla

    Elihu Quintanilla Newbie

    Joined:
    Mar 15, 2020
    Messages:
    13
    Likes Received:
    1
    Masked the truck bed for the bed liner. Sanded it down too idk if it was necessary but still did it.
     

    Attached Files:

    Justintheegreat likes this.

Share This Page