wa waaaaat 22 dec 11th and driving toys 4 life
Snowed in Yea it would be a 5 lug. I don't think they had pre-runners back then... I would love to help you with this measurement, except there...
That's ridiculous low!! I have the same lower arms right here. I got em from DJM Suspension. :eek: I hope those tires don't hit the fenders on...
hope this helps I had a similar problem with bogging down with my '92 pickup. The EFI fuse was blowing. I checked all the wiring and found a...
brakes are important Rear braking can be controlled by messing with the load proportioning valve. Buying a new, adjustable, valve could prove...
I am about to drop the front end and the fenders need to be cut. Only I am not totally sure about relocating the stuff under the hood. What can i...
swappin The bumper will fit but it might require 4x4 fenders cause it's wider. A full on front end swap would be sweet. If the 4runner has a...
flipping out up in here I have never done a carrier bearing flip. I'm pretty sure it can be done. Am I right? I need to resolve this issue. I...
Strictly manual Well, if you can find out service records to see what work has been done it might help you find out through process of...
fitting a splined driveshaft By the word "anything" do you mean any 4x4?
cutting frame This is probably a common argument about BD's but once I cut the frame I would want to use new metal all the way back. What does...
Z Is it possible to keep my heater, drop the body(traditional, no Z), and use a cando bolt on reverse 4-link with bags? That way my 4.5"...
body drop I would start with a static drop. A different hood would be my choice too.
So very impressive Okay recap. I looked at those pics and realized that s*i* is pro. That is a lot of work. It must be nice to have a group of...
traditional Where can I find how to do a traditional bd? With this type, what are the issues with the firewall?
Mcbushingzz What bushings do you need? You may have luck with NorthWestOffroad in Bellingham Washington.
My truck's rearend is about to be re-assembled. I just need to figure the correct angle adjustments to make. How many inches of drop is the...
C'est noir. Bon! How much is it dropped?
Armless man Can a brother get a part# for the DJM 3" drop arms? Just like SMC's got!
Yes I believe they do. To install them you need to: Put front up on jack stands, remove your shocks and use a jack to push them up into place.
Separate names with a comma.
