The thicker of torsion bar the better for sure.
Rear is 3" blocks and de arched springs.
I agree you should pick up the 4runner body and drop it on the 2wd frame. You won't be able to get as low doing it the other was. If your 2wd is...
DJM has 3" drop control arms for 89-95. You may be thinking of the spindles. I believe the spindles (i have belltech) can be used on both models.
Are you running platinum plugs?
I don't know if it is direct bolt on since I haven't used that part. But I know there is a gasket for my stock clutch master cylinder that goes...
mcylinderz A Geo Metro has a small master cylinder. If your truck is wearing 22s you will probably need to have it recessed into the firewall or...
More pics http://i758.photobucket.com/albums/xx229/planemos/curtscamera1009.jpg...
If it's bad ground it close to the frame.
It has a bit of damage on the roof from a 3-wheeler flipping up when I hit a snow bank. It smashed out half of the rear sliding window. I can give...
It might be the distributor being worn out. I don't know for sure but I have a similar problem with my 1988 4x4 22RE.
what is the point of doing this? Is it to get lower? Because if you keep the stock leaf pack and take it to a spring shop they will de-arch it...
:funnyup:YEAH! That is exactly the reason why I bought a reverse 4 link. It is the bolt on one from CanDo. I like to drift. Today my Dad noticed...
The engine didn't make it man Ya..... I was driving over a mountain pass. Pushing hard. And the engine block exploded. So it was the headgasket I...
Toys work hard I have seen Toy pickups haul 10 000 pounds. 1500 pounds is totally possible. Just leave your bump stops in. I added an extra leaf...
Good info thanks Hey guys! I have a 1993 S-10 and I am looking to swap in a Toyota engine........LOL Just kidding. They probably are di**s, but I...
CinNAMmon, what does VAFM stand for? I may need to replace that. I'll check my vacuum lines for problems.
How did you make a sticker with a swear? Cando Specialties offers low profile tranny crossmembers. I still have all my leafs too. Except I...
here's another one Check all the fuel lines while the truck is running.
Mechanic shop did it for me I did that procedure on my 98 Taco. There is a line that runs from the front of the frame, near the firewall, and...
Separate names with a comma.
