You're right about the idle setting causing the surge too. It's been so long since I dinked with an re I'd forgotten that cause. I've had...
The R series engine has head gasket issues just like the M series and 3vz due to factory low torque specs on the head bolts. I've ran 75 ft lbs...
The felpro gasket will either last forever or it won't. My luck with them hasn't been stellar but I've seen them last on occasion. I torque to...
I hope they hook up decent when cold, I'd be ecstatic if they hook as well as the street tires I run now and get better as they heat up but I...
He says about the 3rd lap they'll be hot and start hooking up. [IMG] I just grabbed enough for next season. The rears are an inch taller...
If this had happened a few months ago I'd drop one by on my way through your town. It's not really worth shipping but if you can't find one...
These are basic factory "sport" mirrors I pulled off a basic factory 4x4 yota. [IMG] If you pull the the plastic trim off the inside of the...
Radiatorbarn.com
Once I get it dialed in I'll be going out for a beat down for sure. This weekend I'm picking up a couple big stacks of slicks from my uncle. He...
The arm on the end of the torsion bar slips off, you don't need the whole bar.
Yup, either the booster is bad or the vacuum line between the booster and intake is split somewhere.
I just pulled my oil pan with the engine and 1 ton sway bar still in place. I dropped the crossmember under the pan and unbolted the idler arm...
Parts are in and the truck is running better than it ever has. The valves are a bit loose so it's ticking a bit but I'll take care of that once I...
It's usefulness for alignment purposes is limited but I suppose there are a few degrees available before the bushings get trashed from side loading.
My order from Engnbldr came in last week and my LCE order came in today so I headed to my brothers and got to work. :D [IMG] Turns out I have a...
My 89 base model has the rubber gasket from the factory. If Toyota can look up a part number by VIN I'll gladly post mine since I know it seems...
Gotcha, it's always good when someone ELSE pays for your next upgrade. :D
So why did you rear end someone? :lol: I'm dumping the whole inner structure on my front clip to get all the crap out of the way and save...
Yup count me in. Gotta stay up tonight since I jump in the semi at 10pm tomorrow night on a 12 hour run.
I don't see how the dashpot makes a difference in backfires but it does make sense from the emissions standpoint. I have noticed that any exhaust...
Separate names with a comma.
