I did it last summer in order to clear my air filter. I've since removed the plastic spacers I'd used with a flat washer so it's only raised up...
Are you running an A340 or A43? I built a Jeep AW4/A340 hybrid with a paddle shifter in my wheeler and I'd modified the valve body and...
Start banging gears and catch traction at the wrong time and yes they'll eat the ring gear. The 7.5 case is thin so it allows the pinion to...
The shafts come with the housings. I have one in my 89 and one out of an 87 that may end up in my 84 if I ever get around to it. They are found...
Something like a 11235 muffler would work depending on where you put it. If the exhaust is going to go over the axle an offset/offset fits better...
Nice header for sure. I ran one on an old truck and I'm going to be running one on my 89 before too long. As for muffler you can't go wrong with...
Factory are best by miles.
If I remember right the trutrac units are front/rear specific so be sure to ask when ordering. I don't understand putting $.05 into a 7.5"...
Yup. I use a bolt, 2 flat washers and a socket large enough for the sleeve to slip into and press the sleeve out. Easy-sleezy. :D
King Of the Hammers.
Damn yea you're absolutely correct it's mkIII. I was too caught up watching KOH yesterday to realize my error. At least it was caught before...
ALL 4runner and 4x4 pickups have 8" or what is known as G code in 2 the wheel drive world. But yes, g code 2 wheel drive or 4 cylinder 4 wheel...
If you use a factory V6 3rd you won't need conversion bearings to use a supra LSD.
If you want lower than that the only factory gears are found in 4 runners from 89-95. V6 automatic had 4.56's and V6 auto with factory alloy...
Easy solution is to switch to a V6 diff out of a 4x4 that'll give you at least 4.10's and put an mkII supra limited slip in it.
On a 4x4 the neutral safety is triggered by connecting the white wires with black stripes together. They are in the harness on top of the trans...
Shallow 17 mm socket with wobble and about 3' of extension will take the top bolts right out. I use an end wrench to bust them loose from the top...
The only issue was with the heat sink not having enough contact. I ran an hei module on my 78 with a Mallory SS coil. I simply mounted the...
Make sure it's normal maintenance is up to date and keep your ears open for the sound of a light rattle coming from the front of the engine. The...
Fill the gap, duh. Wider tires on wider or more offset wheels so you're making use of it.
Separate names with a comma.
