overall folding it is easier. although the areas where all the metal comes together at the front is very strong and may need cut and welded. the...
if ya look in this pic the pinch is that little guy hanging off the rocker lol [IMG] here is after i cut it off and welded the seam [IMG] if...
welcome nice truck! i'm a couple hundred miles east on I-8 at the I-10 interchange
most people run a 2500 in the front, and a 2600 in the rear. a slam re6 is equivalent to a 2500, re7 is same as a 2600 on my hilux i made it to...
here is a thread that we built a 3/4 frame http://www.toyotaminis.com/forum/build-up-project-threads-21/80-pickup-project-6299/index5.html here...
a 3/4 frame is custom from firewall back. also the rim size really isn't important when figuring out what will lay (unless its a 22" rim lol),...
people speak very highly of the slams i'm sure they'd work just fine. i've personally had great success with aim bags, but people will tell you...
you can use the factory bushings on the body mounts. don't eliminate them. a "z" is fairly simple if you're knowledgeable about welding/fabbing....
a ply is a layer of material. just like tires. a light duty tire will have say 2 plys for the side wall, where as a heavy tire for a 1 ton truck...
the 350 would be much cheaper. jz swaps are known to work their way up towards 10k are you in the valley?
thanks thanks thanks its basically like wiring your switches like normal, except they're all together in one spot. one terminal block...
truck came out nice man!
Separate names with a comma.
