http://portland.craigslist.org/yam/pts/1847294044.html Plus he has some of the parts floating around in other posts.
Wow... that sounds like a great idea. I might just try that. Of course the painting part isn't the part I suck at, it's the body filler part.......
What is that? A Previa? :puke: the Honda looks like it's bent... like it's higher in the middle.. the Neon looks like a car I've seen here...
http://portland.craigslist.org/clc/pts/1843074944.html 350?????
That is badass.... I considered doing a 3rz swap into a 240z.... the old Z's and 510s are so easy to do swaps into, tons of room. a 3rz in such a...
Drove it! :waytogo:
So what's the scoop on this now that it's getting closer? Who's all in? I'm pretty sure I'll be able to drive my truck there now since it runs,...
Drove the truck! Ok, well it was only 10 miles round trip, but I drove the truck! We're redoing the bathroom in my house, and we filled the...
I meant for jetting really. I have the idle going at 900-1000rpm, best I could get. I figure that the bleeds or the jets may be a little lean....
Now that I have the suspension almost done, I need to tackle the carb. Was wondering what the baseline setup for a 20R is for the jetting. From...
More progress. It rolls. Last night after work, bolted everything back together on the front end and installed the sway bar. Didn't notice that...
Post some pics on here, you'll get more attention. We like pics around here :drool:
Check the CL ads for portland... they are all over the place. I've seen 3 at a time on the list. If you need one I can find you 3 in 5-10...
OK yea, NorCal... gotta be specific... :p
Yep, it's not just cheap, it's HELLA cheap! (you can hear my California accent right though the post, huh? LOL!)
I still have the stock sway bar if anyone wants it... otherwise off to the dump it goes with the next load next weekend. Lemme know. Remember...
Progress and VICTORY! Finally got a chance to get at those lower control arm bushings! Basically used a contraption based around my puller....
Had a 5M in my old '81 Supra. Not a bad engine, got about 22 or so MPG, pulled decent. Always ran good. Now the auto trans... that blew. And...
Compression was fine. I'm betting it's the carb. When I have time I'll figure it out... things are a bit hectic now and will be for at least the...
I dunno, could be the carb, could be the head, could be a lot of things. It takes a ton of noise and runs like CRAP. I am trying to find a Weber...
Separate names with a comma.
