Have you tried LCE or 22REperformance?
they're not hard to pull, at least mine weren't. it is really two bushings, one on either side. Remove the metal sleeve from inside, then just...
........only haunted by the ghost of the original engine!
well, my biggest problem may be that this engine is a complete frankenstein, and I assumed that everything would fit together. DOA head, LCE...
I have oil pressure, wouldn't I only get oil pressure if the pump was working?
I didn't replace the crankshaft, so i'm gonna drain, re torque, refill, and re test. New coolant temp sender and pigtail came today, so I will...
I've go her running right now. Running rough, but running. At higher RPMs she smooths out, and will kinda surge at idle and smooth, so I want to...
DUDE! great tips! yeah, for some reason there isn't a chart for this one, oh well. I've got a couple days off in the middle of the week, gonna...
Oh yeah, and I got the new fuel pressure gauge installed on the back of the fuel filter. Pressure seems nominal.
IACV is dialed now, TPS is the best I've done on that little majigger. Next up is the coolant temp sensor. Most of what I have seen for measuring...
I've got the engine running... kinda. I had to adjust the stop screw on the throttle valve to get it to run, so I am leaning towards the problem...
do they both have tilting steering wheels?
cool, yeah, thats what i've got for now. I'm readjusting my TPS, and have hooked up a gauge to measure the air pressure in the intake manifold.
without the ability to run the engine long enough to properly set timing, the best I can do for timing is to set the 1st piston to TDC, then line...
Working on a setup for a fuel pressure gauge. If fuel psi checks out, I am thinking of having my fuel injectors sonically cleaned and rebuilt. If...
Dude, I can't even get the engine running well enough to set the timing propper
wow, all good tips, thanks! hopefully this weekend I can find some time to play around! Fuel pump and regulator are definitely high on my list to...
checked, double checked, referenced, and confirmed. As with wiring , fuel, and coolant lines.
I readjusted the valves, and most of that rattle is gone, I just want to adjust them hot now which is going to be a problem if i can't get the...
Well I am running quite low on gas, and it has been sitting there for a couple months, so I am gonna flush and refill that, thanks for the heads...
Separate names with a comma.
