The plexi or lexan would scratch too easily and look worse than the dirty bed or suspension. Also cleaning the bottom side of it would suck worse...
I'd like to, but I need to call the local guy and get a price. Last time I checked, he told me $600 for up to two days worth of work. I don't...
So, after a few weeks of street tuning and some significant gains from both tuning and the engine and turbo breaking in, I am impressed. By both...
The only problem I see with a stud is that you will make it very difficult to change the timing chain and guides later without pulling the head....
I commend anyone's efforts to modify anything. I just don't know what the benefits would be.... :D It doesn't work out cost effectively in...
Don't be afraid to use more wraps of teflon. We use 9 wraps where I work and Grip thread sealant. They never leak. :D
Yes, as long as the threads are the same. How deep is the cavity below the sensor? You aren't just bottoming it out are you?
No, definitely not. What are the benefits?
I chased leaks from my valve cover for years. I finally looked up the torque spec on those fasteners... 6 ft-lbs. Over tightening there causes...
Just remember that the torque spec is pretty low on all of the timing cover bolts. I think 18 ft-lbs was the highest on mine and a few were 9....
They are stronger, but you can get the hyperutectics just about anywhere. Still only handle mild builds. Of course you can run boost on just...
Water to air should be really reliable. It's just a pump and a small oil cooler sized radiator that would fit between the condenser and radiator....
Noooo. Sorry. Even with the 4wd bumper, the frame is an inch or less behind the chrome. I'm currently in the same boat, trying to figure out...
I don't really know how much power I'm making. The engine build is capable of 24 pounds, but even at 10, once it starts to build boost........
Just imagine how fast it'd be with a turbo......!:eek:
I just finished my 22re. There's not really any feasible way to do it for the kind of money you are talking. I fabbed up the exhaust manifold,...
Ideally you'd have a wideband O2 sensor to get a better idea of what you really need. Are we just guessing how much fuel to add or take out?
Yes, ideally you want the length of the traction bar to be the same as the center of the axle to the front spring bolt. But, as long as you use...
First thing to do is check for slop in all of the steering components, ball joints, wheel bearings, idler arm bushings. If all of the slop is...
Bernie, if you ever want to trade up to a newer truck, call me.
Separate names with a comma.
