Mine runs way too rich, bogs down, gets about 16 MPG versus my previous 26, and won't run at all on hot days. Weber agrees there is an issue, but...
I can realistically do any amount of drop you want, within reason. What are the DJM arms $200? I could probably do about $150, usually $20 to ship...
Yes. If you get a later automatic you just need the linkage/kickdown cable (which will need adapting) as well as the flex plate and torque...
Hey give me a call tomorrow or whenever you get the chance. I have a creative fix for this issue, semi cost effective too. Don't care to share...
If you buy eBay, try to make sure it isn't a ChassisTech spindle. They tend to go for a good bit less than Belltechs. I used to have a link to...
Sweet. How much do I owe you? Maybe figure out shipping first? Area code is 95492. You take PayPal?
I might have to check those out. I couldn't find the right pitch at ACE.
On eBay they want more than the whole frame cost me.
If you pull one I will pay you for it, shipping and your time. Cross shaft is the piece that connects the control arm to the frame.
I need an 84-88 2wd manual steering box. I was not aware that they changed the bolt pattern on the 89-95 trucks and mine won't fit my 87 frame....
Smoothed out the arms to show how they can look. [IMG]
Actually I decided to run a special from August 22nd to September 12th for $725 shipped in the US, with stock cross shafts. That should be about...
Thats with billet shafts though. Cheaper if you want to use stock cross shafts.
Somewhere around $800 for a full set, with shiping in the US.
[img] [img] [img]
[img] [img] [img] [img] [img]
I'll think about it. They wouldn't really be seen, but it might work. TIG.
Mine says SLMD IM
Will do. I'll be working on uppers next week as well.
New Toyota lower arms. [IMG] [IMG] [IMG] [IMG] [IMG] Will be available adjustable or non adjustable. The purpose of the lowers being adjustable...
Separate names with a comma.
