http://www.camdensuperchargers.com/index.php?pag=401 And from LC= http://www.toyotacatalog.net/M1WebGear/ProductSearch.aspx?Class=1641
a camden supercharger would be bitchin if you could afford it.:waytogo:
also the fan clutch is a easy fix, stp oil stabilizer is the fix, remove the phillips screws, fill the hole inside, spin the fan clutch to get the...
check the back side of the motor, sometimes mechanics in a hurry will not set the half moons in the back correctly and they will leak, also check...
Hey sd did you ever get the rear sway bar in? How hard was it to install?
the timing chain cover?
is it a four or six? if it is a oil pan leak the dealer uses a tube of black silicone.
Installing these kits are generaly easy its the required fab work thats a pain. All long travel kits require some sort of fabing like the enigne...
Oh yeah and second on the calipers, or micrometers will work too.
I believe the 25mm is only avialable on one tons and v6 models, due to weight of the v6 and stability for payload on the one tons.
the clutch master sits to the right of the brake master and on a auto will have small dimples where the alignment bolts will go and then you need...
My 87 came with a jap bed. Dunno if its special or not but its the el stripo model 2wd 4speed no ac,ps,liter,clock, not even a radio.
Hey 88 there's tons of kits out there that are made for your truck, long travel kits w/ longer arms w/ or w/o coilovers, complete four link kits...
The word through the dealership that I worked at was that the laser block motors differed not only with deck height but the lasers also had forged...
[IMG] They were made by APC,dont know why the were discontinued though, I have a pair here's a pic, they are cheap the insides melt. If you could...
A msd coil will produce a hotter spark if you are going to use just the coil you will need a plug wire set that will have less resistance to get...
Its way worth it thats why its a million dollar industry. Kits like this will generaly go for between $2000 to $5000, you can never imagine what...
Count me in for one!
[IMG] This is what it looked like before it came off.
I believe I paid $2000. for the kit but it been a while,less the coilovers, stablizer, reem work, and gusseting, I sold thr rear kit to a friend,...
Separate names with a comma.
