It could be the one to slide the seat back and forth????
If you look at were the shaft that has the rag joint flange and the shaft that comses from the fire wall, one slides into the other, there is a...
As far as suspension is concerned drift is 95% driver in any vehicle always! But I do have and am building a killer system, right now I have the...
Ok yeah its all the same truck, after many many thousands of dollars, and lots of fun, and a oddly understanding wife, as far as the carbon fiber...
My truck is a 1987 rn5 el stripo model, was first bought new by us elevator and was used for a parts truck until 1999 when my freind bought it...
The lab metal really isnt hard to sand in that aspect, and the sanded finish is the same as plastic filler ie bondo, evercoat, its only as good as...
I agree as mentioned above bird terd and grinding is the better, but if you want to fill it other than welding the absolute best metal filler is...
Hey the flywheel comment brought this up and I'm sure its late but on ebay there is a EXEDY clutch & FIDANZA 9.5 lbs fywheel for 395. and 35....
Thanks Guys
Hey guys I was browsing through my pics and came across this pic, where did the valence come from and did the guy just cut a slot in the front of...
You got it!! Good quality parts, parts that play well, and a brain.
If your motor is stock or a mild build you will have to rejet the carb, its real easy, you can call lc and give them the specs on your motor and...
Is your engine light on?
Also Engnbldr has realy good quality parts, I have some in my motor and I have never had a failure.
As far as the gasket is concerned I got it from my uncles head shop Baker Cylinder Heads their in henderson NV. I needed it because I was over...
I forgot all gaskets are factory except a cometic metal head gasket and downey header gaskets.:verdict_in:
Ok I know I,m a bit late on this but I have a **** load of money in my motor and it still passes smog, first its a lazer block from my 87' I'll...
the ifs front ends are total crap in the dirt they offer no articulation and if you try to crawl over something slightly off camber your truck...
I had them made at a shop that is long out of existance, I paid $50. But they are real easy to make without a bender, all you need is a saw, a...
yeah they have a small skirt that can get pinched, and I always put a small dab of black silicone on but sides of those half moons as well.
Separate names with a comma.
