4160 # 1805s carb is unused.. still have the box bt its old already. has gaskets and a holley rebuild kit.. looking at 300 OBO.. item is in...
for either 20 or 22r motor.. LMK!
anyone have one laying round?? looking for a 2 or 4 barrel..with manifold. or a carb with an adapter plate for 20r. doesnt have to be pretty! nt...
ok got a truck thatll start n run good..just wont idle at all.. gotta play with the gas to keep her going... any suggestions? i rebuilt the carb...
clutch will not release... already swapped out slave,master, and the elusive cracked clutch bracket.. no leaks.. pressures there.. it just...
in the process of porting out my head... was wondering what to do for more power and efficiency... is it better to leave the swirl style ports...
ok so im going to start building my truck frm the ground up.. gna start at the motor since i have it sitting.. im gna need some advice on my build...
i was told that tying a steel pipe to both rear leafs behind the axle will make it act like a sway bar.. thought it might work so i was...
im looking to go turbo after i build my hybrid.. trying to get back my early 22r head from a friend.. thinking if the heads used on pop up motors...
im looking for a 4 barrel carb... brands do not matter.. looking for 500cfm or more..and all the barrels must be same size.. used or broken...
i know theres some 2x toys with 8" housing, but i dnt have those.. i do have a 4x 8" housing and im curious to know if theres any way to use it...
whats the most material i can shave off a 20r head so that it still can be bolted to an early 22r pop up motor??
so i just slapped in a cam from my neighbor...claims to be a 280....the problem is i havent really felt a difference:eek: its a web cam. just...
any1 know or have a diagram that will show me which vacuum lines are absolutely nessecary??
im in the process of getting rid of my early 22r pop up motor, but its pretty hard here to find one of these! its a single chain that came off a...
ok so ive been eyeballing this cressida near my aunts house for a while..finally stopped by n axd the owner what the deal was..told me 400.. that...
ive seen short ass intake manifolds on hondas and extended manifolds from the toy EFI's..how it goes out and sweeps back towards the head??what is...
how would this fit?? anyone have this set up? pics pls!
i have a set of calmini shock absorbers and so far the rear is good..need to get shackles for a 4x. i noticed that the front has a bar that bolts...
looking for better stopping power for my 90.. any suggestions?? will front calipers work on the rear?? nt sure if this is the right section for...
Separate names with a comma.
