What trans? That seems really high for a 5 speed. My auto runs around 2500 ish? 3.73 gears....
Ok, I'm sorry. I just get worked up when I'm told that what I've done doesn't do what it does (or does what it doesn't). You guys are...
Umm, this is a cite. I think it fits definition number 2.. That is the worst description of the similarities in suspension geometry I've ever...
No, If you are asking if the 2wd bumper and lower valance match up, then I can tell you that the 4wd fenders are a bit wider at the flare than the...
Ok White Trash, I don't know if I have ever used the words "great" and "reverse 4 link" in the same sentence. I could be wrong, but I've always...
You really should give credit if you didn't write this. So that the whole piece could be read.... Was it a copy and paste?:cool:
I would, but if you couldn't, it sure sounds like a vacuum leak.
I'm glad you are happy with the setup that you chose. Truck Action, could you please post some supporting evidence to the "facts"? What...
Really? You're asking possibly months ahead of time? Haha. ;) If I remember correctly, they may be 19mm bolts. I seem to remember them being...
Which Borla? I've had the best luck with a perforated tube resonator and perforated tube muffler. I thought it'd be louder with no baffles, but...
Did you have the battery tested? A bad cell could cause strange issues.
Welcome! Where are you located? Roughly....
But I think you might be looking at this differently than I stated. I specified the need that the 22re has as far as theoretical flow. I read...
If you max out the volume that your head can flow at 1 atmosphere, then boost is the unused volume being converted to pressure. So, your CFM is...
It is a smaller intercooler (technically an aftercooler), but it is plenty big for the CFM that the 22re needs. You have to remember that the CFM...
Finally got a new "better" quality radiator. And by that I mean, it cost more, hopefully the core is not epoxied like the last two crap Chinese...
I don't know of a site with step by step instructions, but any good Hayes or Chilton's manual will give good instructions. Just built a new...
No, the axle floats freely in the spider gears. Even a new rear roller bearing will have some movement in the lateral direction. Not much, but...
Did the older Hiluxes use tapered bearings for the rear axle? I didn't think they did.
If the lug nuts and back plate bolts are all tight, the only movement you can have is from the wheel bearing. A few thousandths movement is...
Separate names with a comma.
