That is a very cool shop truck. You look like you're having fun. I would be. Nice work keep it up. LOL that video had me confused at first. Then...
Aren't those tubular upper arms!?
Sup. I found this on speedhunters.com and had to share it. Toyota Hilux built to slide: GUEST BLOG: NIGEL PETRIE>> ENGINEEREDTOSLIDE DRIFT HILUX...
I'm getting a new 3.0L Toyota V6 pickup radiator today. And 2 KYB rear shocks.
Well the actual adapter bracket won't have to be as thick as that. I just gotta work what little money I have and get to the machine shop. Then...
caliper bracket Well after messing around a bit I made a caliper mounting bracket. I got it to spin freely while the rotor was fully mounted. So...
I can tell you the mounting bolt holes are 3/8 inch diameter. And the air port is 1/2 inch.
I did just that. 3 inch block and my stock springs de arched. I was very happy with the drop. my tires tucked in the rear. I had no problems with...
The easiest way to check for leaks is with a bottle of soapy water. Watch for bubbles!
Won't somebody just bust out the BFH!?!?
Ooops I thought u were the OP. That's what I get for skimming over threads.
Oh. Well it sounds like it would still be a fun project :D:D:D:D:D:D:D:D I've never seen it done though
Right now my plans are to carry the black on the box on to the front. But I will leave the roof and the part of the cab above the box with the...
Do like in the 80s and run those shocks and your problem (you were asking for a remedy) will be fixed. Or just extend the bump stops.
[IMG] In the end it will be what it is
V6 U sure u don't want to just do a custom back half x runner?
Yep it's sick. LOL what sits lower the dog or the toy?
I have a set which I briefly used on my 92 extra cab. PM if you want em
You're running 20s? Sounds like you need to get lower! Step 1 crank down torsions Step 2 buy KYB gas a justs from a 69 camaro v8 Step 3 use a...
Hope you're doing something to combat the salt
Separate names with a comma.
