Oh I found it in your gallery. I see what you are saying about the firewall. I feel like my current vinyl cuts off around there. Looks nice...
Cool Perkolator that is exactly the info I was looking for, pic isn't coming in though. I was hoping to install new carpet and install bucket...
Has anyone purchased the moulded carpet off rock auto? I'm curious if it's any good. $150 for their medium grade carpet with backing seems like a...
Jrbobbles you figure this out? I've got an L43 4-speed with the same issue. I have to force 1st into gear, feels like I'm pushing past a gate or...
Thanks for the offer! I'm in Portland, Or so that would be a bit of a drive. I'm gonna check out the local junk yards and see if I cam come up...
Huh didn't know they were that hard to come by. Will I need to move the crossmember for the w58 swap?
I think I'm just gonna deal with the transmission as is for now and just keep my eyes out for w50 transmission to swap in. Its leaking all over...
Well that was a bust. I pulled off the shifter to find the PO had replaced the bushing already. Oh well win some, lose some. Now on to the rear...
I figured I would follow up with my "solution". Turns out the gas cap wasn't twisted on all the way. In Oregon you can't pump your own gas so it...
So if you go to that shifter bushing marlin crawler link they have two bushings, one for the L43 and another for other transmissions. That will...
I probably should have figured exactly which transmission I have first. Its an L43 so I picked up: 4x bushings...
I was going to replace my shift lever bushing and seat to see if I can fix the play in it. I can't seem to find a part number though. Would these...
Thanks. It’s a bit oval so I wish I found something perfectly round but it works. I got it off eBay, it’s an MGB 1968-80 shift boot. I see some on...
So this was too big but I did manage to fix it. I bought a coupler nut that fit the MC rod (M8 1.25) cut up my old MC rod and made an extension....
Maybe I can get a rod adapter like this? Just not sure on the thread of the MC push rod....
Old pushrod is the same length and was set the same before I replaced it. I'm assuming its the original MC just based on how gunked up it looked...
OK I get it but the MC rod is backed all the way out and the pedal is only 3"off the firewall. FSM says 6" but I can't adjust the pedal any...
OK here is what I'm looking at. On the left I have the rod that adjust clutch mastery cylinder. Right now it is almost back all the way out. If I...
I got the slave and master cylinders replaced and I’m trying to set them to FSM height and play. I can adjust the slave and the play on the master...
My clutch has been acting up so I checked the fluid reservoir and it is filthy (green and full of black particulates). I went to bleed it off and...
Separate names with a comma.
