i once hauled over 2000 pounds in the bed of my 88 4x4 with the 5 speed. it sunk it down pretty bad, but as far as power it hauled the weight just...
a 5" bodydrop is pretty much laying door right? i don't think any pre made cowl hood will bolt on being that low. you'd probably still need to...
did you do drop spindles on it? i'm looking for a set if you did and plan to sell em.
here is some pics of my 1uz sitting in my 73 stock engine bay for reference. the bay should be about the same size as your 71, but the 1uz is 2...
:funnyup: that rotor only looks small in the 20's stock supra rear measures 291mm which is 11.45". if it'll stop a turbo'd supra it'll stop...
not without a lot of custom sheetmetal work.
i think you guys would be better of finding a different ratio rearend. pretty much all the trucks prior to the 84+ models came with a 4.10 ratio...
i did a rear disk swap using 87 toyota supra turbo rotors and calipers. i fabricated caliper stands out of some 2"x 1/4 steel. i machined the...
i haven't personally owned a truck with a weber but i'm gunna say efi. i would let my 88 set for almost a year at a time and go out and it would...
yeah i bench bleed mine. wilwood says to jack up one side and bleed them, then jack up the other and bleed. i haven't done that part yet lol
[IMG] This years Cruise/Show is scheduled for June 9th. We will have fun cruising from Phoenix to Prescott once again. If you haven't done this...
can you check what pressure is being applied in the system? i have a wilwood dual underdash manual m/c, all stainless hardlines etc. also front...
it really shouldn't hurt anything other then making it a little dirty over time.
any swap is possible, but i'd recommend staying away from a straight 6. my 1uz v-8 barely fit in the engine bay, and that was moving the radiator...
easy answer is no. they are different generation trucks, and they happen to be the gen difference where the frames completely changed. you'll...
i tried to fit a 79 gate to an 86 and they are not the same size. it will not bolt right up.
i decided that cutting the floor/rear seat area to fit sucked considering that i'm building it to haul the family. 1988 mazda rx-7 independent...
its from flaming river and yes they have it in black. you'd have to change your column or have a custom adapter built to use one though....
lol thanks guys. but it's still nothing but a $200 toyota with a bunch of parts thrown in :lol: i put the column in today. still gotta do some...
if i was building a truck i'd swap in a 1uz lol
Separate names with a comma.
