few more pics. working on it and the lux and the same time depending on what kinda mood i'm in lol rear is almost ready to be burned in [IMG]...
thanks. i actually lurk onsills but haven't posted since i already do on the NZ site and it's a lot of the same people. thanks. i actually...
they go into the engine bay about 7 3/4". i cut off the lip on the side towards the fender, which took a little off the width. the tire still goes...
i'm hoping the scion fr-s sees a bigger motor option to fill the void. however this new lexus will give me something to drool over again lol
lookin real good man
put this in my wifes 4runner they're 28"x8". i paid $12 a piece, but they're normally closer to $15. i bought them at a local trailer supply. [IMG]
it's on the backside of the arms. that bolt has a weird looking head that the torsion key goes over. the torsion bar slides into the key and is...
when you bag the front of a toyota the torsion bars are removed completely.
re indexing them isn't done at that bolt. it's done at the end of the torsion near the control arm. there is a "key" that bolts to the control...
i had to make the firewall hole 1" smaller. i had cut it to use the stock column, wish i would have waited lol. [IMG] and i changed the...
sounds like you want a supra with a truck body. this is the closest thing that comes to mind, but a different year then yours....
the tires usually say to inflate to the truck manufacturers specs, which is on the data tag in the door. i personally run the highest psi the...
thanks thanks cory. can't wait until the back of this is all finished up. guess i gotta work on it first lol thanks. i know the...
thanks. i'm busy all weekend at kids b-day parties so no work for a few days lol thanks true true. notch tubing courtesy of james. i...
that's sweet! it's weird for me to see an early lux that isn't stock or lowered lol
when you call the driveshaft shop just expain that it's bagged and they should know what to do . similar to doing a flexy 4x4. and you should...
here's my progress i got the front drivers tub in. clutch is being flipped to the inside, and getting a smaller booster [IMG] the swing arm of...
javi is the floor pans pushed in at all? if not i'd just drill out the spot weld holding the inner rockers to the floor pan and get to fitting in...
man if you're gunna bag it and intend to keep the back seat i gotta say go with an independent rear. on mine to lay frame with 215/35/18 i had to...
my local walmart made mine. cost like $3
Separate names with a comma.
