this project is a pain in the butt. i should have kept it a truck and bought a suv for the family mobile. lol
i've taken a lot of leafs out. some have been done easily and some where a bastard. best advice i have for stubborn ones is a 1/2" impact. the...
yeah man don't start it if you can't afford the down time. there is a ton of stuff you need to pull it off, and it's all little things that nickel...
best bang for your buck will be a small block chevy. lots of people making kits and adapters to run the stock toyota trans. a 1uz or 1/2jz swap...
did a little work on this today. my wife had to drag me out there cuz it's so hot and humid lol wife welding up the rear tubs [IMG] and i built...
the bar that mounts the dash has to come out to get the under dash a/c assembly out. or i should say it did in my 4runner.
it's been a 3 year project so far. but as far as the motor goes it was as simple as mounting it. i probably have around 20 hours total plumbing...
i'm about 95% done with my swap. it runs and is all plumbed. i just have to finish the headers and put in a driveshaft. although mine isn't so...
you can only get drop spindles for the 84-95 toyota trucks. nobody produces any after market for earlier trucks. it's tough to find stock stuff by...
i do believe they bolt the same, but thats going off of what i've read. the shifter locations change a bit depending on if it came out of a car or...
lol i never used the word "all" in my post. the negative i seen was "tore the fuk up" and "looks like sh!t". i've been on this forum for a really...
i'm pretty shocked at the negative comments. lol this site is full of threads of 2" drop blocks and loosened torsions with 50 people responding...
look on the tag in the engine bay. it'll show you what rearend and trans you have. it will start with a W. my 22r has a w46 4 speed. a w56 has...
i have the 22r harness. it's just that there is a lot of wiring to have all the power windows and locks. it runs off of a relay behind the dash...
hey guys i have a question. i've searched online for the answer but only find people preaching a 3vz to 5vz swap, which i have no use for in a...
these are stock 84-95 cross shafts. the bushing is just a universal 1.5" o.d., 3/4" i.d. bushing. the steel is 1 3/4"x.125 wall tube that i had...
are you after a title with the cab?
try to pm or email jeff. he can change it for you
mine is based off of 84-95 stock toyota pickup measurements. the uppers have been moved in 1/2" per side, and the lower arm length was shortened...
i'm excited for you josh! as i said earlier the booster has no effect on the hydraulic system of the brakes. i can't figure out why it's such a...
Separate names with a comma.