Yea I did the Lexus LS400 stuff.... If your after the big flashy huge rotors and calipers...... Use the 94 mustang cobra rotors and...
Your not going to get any better gas mileage from a 4.3 over a 5.7 4.3's are pigs. There off balance, drink gas and dont like the rpms. I...
Ok, I got back last night. Woohoo back in the good weather! In gunnison I visited my old boss (the Performance Shop). He's the best carb guy...
Im rocking 16's Im running 16X7's and they didnt rub when I wasnt so low in the front. (with a 245/50R16 mustang/camaro tire) 17in tires...
Cool! Why the guy get rid of it? Just a headgasket, or a grenaded bottom end too?
+1 on the airbagit.com---chassis tech spindles. One beef with them tho, the backing plate bolt holes were tapped SAE. Not that it mattered,...
Cool man, hope you get it together :waytogo:
Very nice clean rebuild!
Its the machined slot about 3/4 of an inch long, starting from the right upper head bolt hole in VVV pic. [IMG]
Yea got to CO. Horrible gas mileage (17)ish. No problems tho
^+1. Going to Colorado tomorrow. 20hr drive in the truck...:eyecrazy: Snow is over-rated. The 34 degrees below zero will put hair on your...
Like I said, on the bezels...(from this guy at least) so theyre more like 30 bucks IIRC. I bought some from this place in Houston. Granted its...
Welcome!
Cool! Hope you got it cheap being it a scuz mobile like that... (I used to have an LT1 caprice) Pics of the motor?
Awesome! Definatly when the dude stood up and did the superman (or whatever) pose.
One wheel got done this weekend. Looked like this... [IMG] They came out a little better with some elbow grease... [IMG]...
^^ Like I said, exactly the same time. 11.1 at 65 MPH. (different trans and no exhaust to keep in mind too man). Got a phone call from Ricky...
Seen one with a SBC. Cool stuff.
+2 on an 18RG. 2.0 toyota 4 banger that is a 8 valve twin cam. Parts are still avalible if you know where to look and they can still be found....
Hmmm... Id be careful guessing that 400 hp there. What stock heads, E7's? Not even close.
Separate names with a comma.
