Welcome and congrats! Although it was good for you, I never understand people who 'give up' so easily on cars like that. If he jump started it...
That's true. Didn't think about that since I never sell my cars...
I was thinking you can just bend the rod. No?
Very nice, both vehicles. Wow. $600 for the Supra, even not running... Back in the day, you could get $1,000 EACH for the front seats on...
Yeah... There is nothing wrong with cutting springs as long as you do it correctly.
Don't feel too bad; I've been running mine into the ground since 1999... :( :( I've tested infomercial crap on it ("wipe on shine" crap), had...
First of all it is Pound-inch, not "pounds per inch" The scale is in "inch-pounds" (the old, but correct IMO, way to say it) and you DIVIDE it...
Over the years, this has been done a number of times in various minitrucks. But these usually use a GM engine with the Oldsmobile Toronado...
Three thoughts (guesses): 1. make sure you didn't install thermostat upside down? 2. I once went through three brand new OEM thermostats in a...
Is this a factory seat? I've never seen a "semi-bench" seat (in our trucks or any car for that matter) with the separate cushions and console...
During college, I worked at Epsilon and when we received a "defective" batch of centers with too-small bore centers, we would just use a drill...
Huh! In my "mind's eye" I thought the arms and axles were pointing down a few inches. But, thinking about it, you're right. That front...
You've piqued my curiosity with this statement and just thinking out loud... First of all, if this is even possible, I am thinking you would...
And White Trash beat me... :D
Yup, yup, yup. Without any before and after pictures, specs, etc. there is no way to tell what Juicyy did to get the effects he is experiencing...
The thing wrong with your analogy: when you loosen a torsion bar, both ends of the bar turn. That is, suppose you loosen or tighten the bar 2...
Huh! Never knew that. But then NASCAR builders do some weird things. Do they have custom made housings with the axle tubes pointing up a or 2...
That would be interesting to see. That would mean there has to be enough slack between the axle and the differential for the axle to be...
These trucks are all live solid rear axles. Unlike FWD cars, the rear axles contain the drive axles and so they have to be as close as possible...
If you remove the EGR valve, you will need two plates. One plate is the plate you made and posted a picture of. You will also need another plate...
Separate names with a comma.
