Looks like I get to convert to a wasted spark setup today! Part I machined to block off the distributor and mount the new coils. [IMG]...
Where are you located in FL?
My MegaSquirt MS2 ECU. :D Not for the faint of heart.
I did. Pretty simple really.
What we have here is a distributor block off / coil mount. Patent pending. [IMG] [IMG] [IMG] [IMG]
I'm not done yet, but hold on...
What Twizted1 said..... That's what I was talking about.
Machined and painted the bracket today.
What do you mean by try-window? You might be able to swap in the 4runner power mirrors from the same body style. I have them, but didn't...
Correct! I keep a set of schraders in my truck just incase I have a massive failure out on the road.
Haha! I just wanted to see if there were any other ideas besides the wasted spark setup I'm building. Hopefully I'll have it done this weekend....
Yeah, two quarts is more than enough.
Anyone ever seen or heard of anyone deleting their 22r or 22re dizzy? If so, how?
You don't NEED shorter shocks for the front or the rear. If you haven't made changes to the actual available travel of the suspension up front,...
It's pretty common. If all the bushings and blocks are tight, then you'd have to cut something loose to take care of it. These frames were built...
Are you planning on any reinforcement plates across those welds?
It's been 5 or 6 years since I did mine. You might be right.
Pretty sure I have an 8" notch, 14" sounds excessive....? Again, not sure of angles and the top is level. 25 degrees sounds about right.
Sounds to me like it could be a ground issue. Check and make sure all the grounds are clean and tight. When multiple sensors are throwing codes,...
Yep, they aren't cheap, but they come as a full upper and lower kit allowing the removal of the forward tie rod and bushing brackets.
Separate names with a comma.
