So my engine shop told me to have my injectors cleaned or replaced. I found a set of 4hole bosch injectors on ebay. They are 220cc and suposedly...
sounds like alot of work. I guess I will keep my non-tilt column
I got the specs for my engine and ordered my engine kit from egnbldr.
Ok cool. Im thinking of getting the exedy one, inexpensive and the ebay vendor is close. If money was no option I would go lc or centerforce but...
Ok thanks. Ive had lc stuff, but I dont feel like spending that much. I have a week or so before I get the engine back so I can research which...
Oh almost forgot here is what my current clutch looks like. If I can resuse it I would rather do that.
Ok so currently my engine is out having the machine work done so I can rebuild it. Now should while its apart replace the clutch. I belive the one...
You can make a factory wheel bigger? What does sometbing like that cost?
there should be 4 10mm bolts (socket I used) holding the dash in. One on the passenger side, one on the driver side behind the cluster, and two in...
so I droped the block off at the engine shop. And as soon as they disasembled it they found the issue. The piston broke in the ring area on the #3...
Engine rebuild ?'s so I dropped my engine at the machine shop and the engine guy noticed that my number 3 piston wall was scored, thus creating...
got my uncles engine hoist and it came out. I cant believe how heavy it is. Off to the engine shop it now goes. thanks for the input.
I think I got those too. Cause the block and transmisson are slightly seperated (like 1/4 to 1/2"). I think Im just going to go run to my uncles...
Im in the process of taking my engine out to have it rebuilt. I have run into a snag. I can't get it to free itself from the transmission. I...
i used it on my corner lamps. I only did one coat so it scratches and you can see the chrome under. Now Im all chrome up front, except for the...
well I dropped off my head at an engine shop to have a valve job, they said it needed some work but wasnt what was causing my issues (oil in...
I finished installing my shaved doors.:D
And the bed I got is shaved too. I just need to do some work on it to make it bolt to the truck. The guy I got it from had a tube framed truck, so...
So today I finished my project. A couple of weeks ago I went to pick up a new bed. The guy was super cool and asked if I wanted shaved doors. I...
Well its been a while since I have updated this thread. Well I replaced the head gasket but the oil leak continued. I drove it for a bit and a few...
Separate names with a comma.
