What caliper/rotor combo is that? Nissan 300/350 parts I assume? Can't find the post covering it. They look about as big as a 16" will allow. I...
Those would be some comfy seats. I'm interested to see how they fit. I had an 83 supra and the seats were one of my favorite features. That and...
I remember sitting in that truck! :D I'm glad its finally getting done up proper. More info an pics of the bike please :lol:
3m super 77 and super 90 work great. I used 90 to do my new door panels, and the same can to glue down the carpet I installed. I also used 3...
You could swap cover plates or silicon the extra hole shut. Ill have to see what mine runs. Never knew there was a diff.
Odd to have upside down bulbs. Maybe the h4 socket was cut upside down or the lens glued on upside down. Flipping them should fix it up.
And if you decide to take those chrome window deflectors off, let me know what you want for them. I've been after a set for ages. I've already...
Two center bolts holds the light to the valance. Outer 4 hold the lens on. I think they poke through, might be able to grab the exposed threads...
That's what the house is for. Double bonus, ya get loopy on paint fumes :D
Try to cut a flat notch in the bolt head for a flathead screw driver. A dremal and a 1" cutoff disc should work. Or smash the lenses and keep the...
How are you set for marker lights on he nose and the fender/bed. I have plenty of them. Truck looks good tho. I dig the starions.
Deff post lots of info and pics as you have a chance. Sounds pretty simple. If I did it, I'm sure the fuel is the least of the difficulties to set...
Find out who did it and shoot them in the ass with a pellet gun. That's a bummer. Hopefully you can find a new mirror and get yourself an old...
I lost fun with that years ago. When it gets too heavy my engine crossmember fills the engine bay with packed snow. It gets bad from there lol. I...
Damn that fits pretty good. How hard is it to wire up the EFI for a 7M, you say it's like 5 wires. Just power the fuel pump and ecu basically?...
I wanna know too. I've got a buddy with a dropped '66 F100, and some guys with various other cool stuff. We could all roll down sometime. Sounds...
You could mount a stereo under the edge of the dash. Or down in the console in front of the shifter. That's what I did. Check my thread. I did it...
A JZ swap is pretty involved. Id stick with a 22r. Especially if its auto. If I swapped an auto, id run the one to the new motor as its probably...
Otherwise id build a 22r for it and copycat the stock setup those had, with the above mods worked into the mix.
A weber carb, a better ignition coil and plug wires, and a better flowing exhaust. Those are universal 4 cylinder upgrades. You can also send your...
Separate names with a comma.
