why not use the linkage piece that sticks into the housing the bolts onto the selector shaft? I've always just swapped that piece with the top...
That kind of thing you need to ask around locally since someone in cali isn't going to be much help if you're in new york. it'd be cheaper to...
carbed or EFI? EFI: no, that shouldn't happen. turning the key off should kill both ignition and fuel. You might be mistaking compression...
Most important thing to know before giving specific advice is what are your abilities and knowledge. It HAS been done a few times, start by...
I hate to say it but modding cars isn't what I'd call cheap. What's your budget and what do you have to work with? cheap means doing it yourself...
85-88 Toyota Cressida. inner front bolt fits, outer front needs new hole. rear needed something to relocate the holes to the side. it had some...
As mentioned, the big thing is the offset. according to their site (http://www.dragwheels.com/product.asp?ID=23) the 17s are -40, 18s are -42-45...
First, are you having problems with it? if it's slipping new fluid will make it worse. if it's shifting hard, vibrating, etc. new fluid will...
That's going to depend on other things like exhaust, compression, modded AFM, etc. I don't know, I'm just saying there's no one answer. Either...
aint that the truth. slap on the wrist few days in gov't hotel doesn't stop any of them. since you guys get such good prices, I'm gonna start...
Do you have the transmission? easiest way to tell is to look at the rear housing on the trans: if it's got the electrical pickup, you can probably...
No offense intended. It's not just for your benefit. there are an alarming number of people that equate alloy with aluminum and have no idea.
how did you manage the whole tapered-stud/tapered-hole problem? ream out the hole so the tie rod goes in the other way or flip the spindles or what?
well, they are an alloy of iron and some other stuff which results in the metal known as steel. it's not pure iron, that's a little soft per...
ya, if you change something, and then there's a noise, usually what you changed caused the noise. +1 on where'd you get the rear
so many new and shiny cars (and chevy trucks wtf lol), mine are all old and dirty '90 cressida [IMG] just dropped a nice fresh engine in...
1. stock toyota temp gauges are horribly inaccurate in my experience. my cressida read within 1mm of the middle from less than 130f to over 230f....
all my toyota M motor (I6 dohc, 2.8l 5mge, 3l 7mge) distributor caps are the famale type you have pics of there. there's enough spring in the...
I use rockauto for whatever I can. their shipping isn't cheap but it's usually pretty reasonable for what's being shipped. even with shipping it's...
yea if the ackerman arm length or angle is significantly different (IE massive, undrivable toe when the spindles are on) you essentially created a...
Separate names with a comma.
