...to be back here. Since I've been away so long, I'll give a quick update: I've moved 2.5 hours away from my previous residence.:) I...
or...you can save a lot of hassle, and a little coin by putting an MSD box on it. If your stock igniter goes out, it's 300 bucks to replace....An...
needs clear front corners, not the clear stock style lenses, but crystal clear with diamond cut reflectors. The orange breaks the silver/chrome...
I'd say, keep the rust. Spend money on the drive train. Rust looks slower, and is actually faster because it weighs less than solid steel. I love...
If you look around LCE's site, you'll notice them selling the usual Offy dual port, and "C" series.....then you'll notice they're selling a...
Top gear ain't seen nothin' yet! You really can't kill these trucks!! http://www.youtube.com/watch?v=89AxuhEHc3o
for the outside of the block and any surface on the outside, use engine degreaser. For inside parts, I've always used kerosene. Just be sure to...
welcome...now PICS OR BAN! :p
Dieseling.... This could be caused by your "idle fuel cut solenoid" going bad. On the passenger's side of the carb, there should be 2 items...
Hp and Acceleration....and you drive an RE? Boost. tons of it. Flywheel. less of it. tires. more sticky. That is all.
If rust makes a truck manly, then mines a 4 wheeled hellcat from planet kickass! Watch out chuck norris!
DAAYYYUMMMM! I wish my truck ran like that!
posting has been deleted by the author...It must've been a good one!
I hope you didn't just throw out the guts.....you know some of that stuff is platinum, right? There's been quite a rash of cat theft in the area...
Hell, where I come from: Rust = free weight reduction! I am definitely diggin' this truck. I can't wait till it get's warm out!
Are these american made strats your doing this too? Jap or mexican.....even american made squiers I wouldn't mind...but if these real honest to...
Also, could someone post a vid of how a 22r revs with a 9lb flywheel. Preferably showing a free rev, and under load as well.
Hmmmm, Let's see...... Would a 9lb flywheel be more fun mated to an engine with gobs of torque in the low rpms, or one with gobs of Hp on up in...
If you're talking about a buick regal, it would have to be t-type, or grand national from the '80s. I know some of them came stock with mesh...
If only you were carbureted ... all you'd need is a saw of some sort , pipe and a welder or band clamps......
Separate names with a comma.
