I've got multiple stock intakes, and a offenhauser dual plane holly 4bbl intake.. I'm open ro offers
Or use a cheap Flowmaster or MagnaFlow knockoffs.. I've had both and glasspacks just sound annoying compared to the others.
Looks good.. Our trucks are very similar as far as engine and wheel selection:waytogo: it would be a good match up in a drag race..
The chain and gear fit through the hole, and personally I think it makes it easier to line it all up. I put the cover on before the head and it...
Lower gears are harder to find, but they are out there.. I'm running a w55 with factory 4.11 gears and stock size tires.. Pulls good and tops at...
Might have figured it out, the back of the fuse box was really corroded, only time will tell if it did truly fix it. Only discovered that after...
Little update: ignition switch didn't help, but I did figure out it is a wiring problem somewhere. I noticed my fuel pump waasnt humming like...
The difference is how much of a flare they have. 2wd only has a little one, but the 4wd one is bigger and sticks out more. 2wd guys use the 4wd...
So my 77 has a problem and I don't even know where to start looking.. Friday on my way to work my charge light came on, I lost power to my...
Keith Black pistons come in 9.7:1
Mine has a lean.. It leans to the passenger side so it doesn't bother me, I just make it level when I'm driving :waytogo:
I'm in Vancouver.. Hopefully one of these days Ill go to one of your cruises/events!
Whoa. I just figured out I'm following you on insta. @77toyota :waytogo:
I don't run one, but I also don't have any problems.. Seems like some people do and some people don't need them
Try using a fuel regulator.. My buddy had the same problem of a jumpy idle and once he put a regulator on it fixed it.. We even called them up and...
Are you using a fuel pressure regulator? My guess would either be that, if you aren't using one, or a vacuum leak. Try spraying some carb...
I got a couple Of mine from Oregon Cam Grinding for $75 bucks each.. First was an rv3, a little lope pulls pretty hard in my built 22r, And...
If my memory is any good, stock mighty max springs give you a 3"ish drop, then the lowering springs go that much farther.. If you want to see...
I didn't have a problem getting pressure when I did mine.. Just put it on there and fired it up, made pressure quickly.. I have heard you can...
I got that message too..
Separate names with a comma.
