The answer depends on what size wheel you're looking at. The answer for 14x7" is a whole lot different than the answer for 20x12" wheels.
Sweet you got one guy who agrees with you, good job! :lol: So if this place is dead what is a poorly designed forum with ZERO posts? Rather...
When I run out of cam about 5600 rpm and the finish lights are still 100' away shifting into 3rd would slow me down so I'd just keep it pinned and...
Before I swapped out the 4.56's for 4.10's it was common to hit 6200 on every straight stretch of the track in 2nd gear. All it did was make...
Meh, do you really need to know how to spend thousands of dollars and days custom fabricating parts in order to make a tractor engine have almost...
Awesome now you have cool looking mirrors without that pesky ability to see what's behind you. :lol:
Perfect location and timing to do a notch.
Yea I removed the support after I got the truck home from the tire shop with the new tires. It allowed me to pull the bed side maybe 3/8" easily.
To fit 265's out back I took a skinny wheel to the lip and cut it down to about 1/4" and folded it up onto itself. When I go 17x9's with a 275...
Yes I ran the led indicator, shift controller and a one off steering wheel mounted push button box he machined from a solid chunk of aluminum....
Shift kit? On the side of the valve body there is a round disc with steps around the edge and a slot for a flat tip screwdriver. Push in slightly...
Either figure out a way to put a bolt in there or tap the hole to 1/8" pipe and put an allen plug into it.
Looks like= this one. I have one with the same capacity but different dimensions. They are nice. :D
That's a good looking lip for a 2x bumper. I ran the 4x4 bumper and the factory valance that came with it. It's a couple inches wider than the...
The spindles caused a toe out condition. I had to adjust my tie rods about 5 turns shorter when I ran drop spindles.
I run them as lowers. There is already a hole in between the 2 bolt holes for the stock bumpstop on the lower arms. I just drilled it out to...
S13 or mkIII? There is one S13 irs swap and 4 or 5 mkIII swaps on here that I know of. I've put serious thought into using mkIII myself but I'm...
They are 4x4 fenders. I ran 4x4 fenders on my 84 too for more width to run wider wheels. [IMG]
There is usually enough give in the mounts but if it fights you just loosening the single stud from the top will suffice.
Leave the stacks for my freightliner and do the side exit. I love mine. :D [IMG]
Separate names with a comma.
