How's this for a mix? 5 finger death punch into Jewel and then a bounce to Mouth and McNeil. I love YouTube!
Want to test the igniter? Warm it up to the point where it starts causing porblems and then ice it. If the issues go away after cooling..... Igniter.
The CRamps? I had the cramps with all the driving I did today! Went through everything CCR had to offer, several times today. Forgot to bring more...
Pantera, Walk! Pantera has been in my repitoir since the '90s! Just before them was the Hu Band, Wolf Totem. Y'all need to check them out.
So, I knew it was coming, failed smog test here in Cali. Didn't think it woud go to gross polluter status. Oh well. Had a lot of O2 left in the...
Looks a litte horny in the back.
If freezing is not a concern water with a corrosion inhibiter is acually best. Antifreeze with a max of 50% mix, pink or green, I use the pink...
You get my attention on the mention of ANY Hawai'ian Island! Throw in a mini or MR2 and ALOHA! Mahalo!
As far as a swal for the baffle? Chances are it really isn't necessary to use a seal. The baffle will still do it's job keeping bulk oil out of...
Another thing that works well for getting a nice polish is steel wool. A little dish washing liquid to keep things moving smoothly and it comes...
Use a flat file to cut the weld booger flush. To prevent scratching the head you can put tape on the section of the file that won't cut the weld...
That thought never even crossed my mind! That would be a good idea!
Saipan? I found a spare in my garage, but that's a bit far to drive. For a bottom tap try Amazon or ebay. If available to you Grainger or...
Guess I can retire! '86 4Runner '90 extra cab '89 standard cab Should be able to pay off my house with those.
The JB weld will eventually leak. MIght consider getting another valve cover. If you are going to drill and tap there are collars that can be...
Drill and tap is an option, be sure to use threadlocker. Other way to reinstall the baffle is to use aluminum rivets. , like the factory did. the...
4age garage is great! Wish I had a dyno to play with. A turbo wouold be nice, but living in Cali I tend to try to keep all the emissions equipment...
Mine's an '87 sunroof with a cheap paint job work in progress. I can drive it daily if I want, but the idiots on the road make me think twice....
I've had a dozen MR2s. Every time I sell an MR2 I end up getting another one. The missus won't let me sell this one.
In an issue with the igniter temp IS an issue, externl temps and internal. When a cap goes bad it can act like an open or a short, or even both at...
Separate names with a comma.
