How far beyond the stock timing is it? Could be a sign of improper cam timing and/or a slipped harmonic balancer. Put #1 cylinder at TDC and check...
Carb jetting depends on the engine build. What jets are used in other engines is irrelevant. You might consider disassemling the carb and cleaning...
Disassemble, clean, inspect for damage, repair or replace damaged pieces, lube and reassemble. If the PO beat on things to disassemble the hub...
Found out these injectors are offered as an "upgrade" being a 4 hole injector instead of the stock 2 hole. Makes sense as the 4 hole design does...
So, my truck failed badly on the last smog check. Cat was dead, for one, and the HCs and CO was way high. I replaced the cat along with the rest...
And this is posted here why?
SOLD!
On these older vehicles electrial connections become dirty, corroded and loose. Some of the issues are from wires being broken in the insulation,...
LCs valve kit is pretty complete, good for the price. I've installed 22r valves in 20R heads in the past, just 1mm oversize and the 20R seats can...
Check battery connections to see if they're clean and tight? Chassis ground clean and tight? Battery cable to starter lug? Starting the vehicle in...
Go custom, you can taylor your sound and clearanes.
I was talking about the rear mount. Measure from the bell housing to the rear mount bolt holes. The 20 and 22 R have the same bolts pattern at the...
Try again, might not have gotten through.
Electronic speed sensor? Just put in a mechanical unit, or get an electronic speedo> Digital LED dash cluster?! I did a swap in an '80, all I...
Go .060" over, The 22R block has shown to be good to .080" over. But if you have the money, sleeve all four bores with chromoly sleeves and go to...
That's the hampster gettin blisters on it's feet.
Post in the community market section as a WTB or want to buy. There are companies out there that make custom cables. Maybe the dealer?
Ask the guy if he'd be able to do the 'C' pillar moulding for a first gen MR2. A lot of people are needing those.
Maybe I misread the image, that fluid might be from the overflow. Is that tube under the clamp holding the resevoir in a position to make that...
Looks clear, could be coolant or just the water associated with combustion. Consider, every gallon of fuel burned createes a gallon of water. Just...
Separate names with a comma.
