Going to be changing out my U-joints this weekend. Seems to be pretty straight forward, but just curious if anyone on here has done them and any...
Ok, after many more this and thats, the brakes are working properly. Wasn't the prop valve after all. Ordered some wagner wheel cylinders and a...
Further update: So bleeding the pressure off above the proportioning valve only released slight pressure. The rears would lock up shortly after...
I'd be interested in the proportioning valve for the brakes. Mine looks like this. [IMG]
Bump
so loosening the lines on the return side or the output side of the master cylinder released the brakes, so guessing fluid is free flowing through...
Ok, replaced shoes, and re adjusted, still locking up. Bled the pressure out this morning form the rubber hose from the axle and brakes released....
This started them locking up. It got worse as I drove on. I may have found the problem. I double checked the shoes I put on and they are...
[IMG]
Ok, new twist. I swear the rear brakes locked up when I did a hard downshift. No brake was applied at the time. After I unlocked them by...
I'm looking for the distribution/proportioning valve block that sits right under the master cylinder. I will try to get a pic posted tonight,...
Ok, so after the pad flip problem was fixed it took a lot longer for them to lock up. This time it was only one side though. Had a mechanic...
Ok, the latest piece of advice I got from a long time mechanic was the shoe towards the front of the vehicle is thinner than the one that goes to...
nope, I've adjusted them several times, but the wheels have always been able to still be turned by hand. Do these 2wd trucks commonly have a...
Yea, I'm getting 2 new wheel cylinders today. I cleared out all the rear lines and replaced the old rubber hose from the chassis to the axle and...
So i had a leaking rear wheel cylinder, upon inspection the shoes were also worn and the drums were out of spec. I bought all new cylinders,...
Center link, Steering dampener, all 4 tie rod ends, Idler arm, both lower control arm bushings, all 4 ball joints. This was a list a parts I...
Has any one had any experience with the polyurethane bushing kits on these trucks?
Thanks for the help, reposted this thread in the right year.
Separate names with a comma.
