Money!!!
Yep, flipped b/j and have djm lca's and shop wouldn't touch it cause they couldn't get it to spec. Even though one side was only out by 0.01...
LOVE the yellow one.
Thanksgiving!
I guess I lucked out on my education. A small private(non state funded) technical school in Colorado Springs was looking to recruit a freshman...
Electrical Engineer. I've been doing the physical drawing of semiconductor chips for 13 yrs. Been a garage tinkerer since I was a kid.
Congrats on the little one!, and the Toy. My son just turned 3 and is showing interest in wrenching on the truck with me. Course the short...
Sounds like more "reasons" to invest in a welder. That on top of all the notches I'm gonna need.
I know, wife says the same thing. I'll get to it, almost didn't post that pic because of the exhaust. :D Any tips on exhaust for an 85?...
Finally, after a month of headaches and related crap, I got my belltech lowered leaf springs on. Of course all the result did was confirm what I...
This is a link I saved to bookmarks at one point and time. There are a lot of other brackets on the site also, click the bumper brackets link...
Thanks for the TORC link. Didn't know they existed. Was looking at the galleries, and saw some sweet looking 2dr hatch's with the mirrors way...
I'd say minitruckin isn't mainstream like it was in the 90's, but it's far from dead. When I got my toyota a few years back, first thought was...
I have the upper B/J flipped, just no washers. Ok, well there report stated this Left Camber -0.3 right camber -1.1 Left...
Note on b/j flip. I used a couple washers on bottom b/j. I also moved the upper b/j to keep distance between them similar. Didn't use washers up...
Alignment help. As I mentioned above, I've installed the DJM LCA's on my 85. I've also since flipped the B/J. Took it to a shop and they claim...
I believe beefed taco now has a bolt in c notch. At least for frame rails. Now he needs a way to do the cross members. My 85 is going static...
Got my B/J flipped this weekend. To avoid the whole control arm swing/torsion bar problem I loosened up the torsion bars. Needed to do this...
I flipped my B/J, upper and lower, which I should have done when I replaced the LCAs. Also adjusted my torsion bars to level out the front end....
I had the same problem when I lowered the front. All the sudden I noticed the passenger side sat lower than the driver. Little torsion bar...
Separate names with a comma.