it can be done on either stick or auto. stick use the clutch start switch, auto use the PN switch. you can always use a couple relays or power...
+1 I do it all the time. not good for aluminum spindles (they're brittle, though it works even better on them) but steel/cast iron ones it works...
drive the really new electronic throttle chevys (I work in a dealer for now) they llift the throttle to shift so it feels like shifting a stick...
OE is 1.625 (1 5/8) ID which is how pipe is measured. 1 is OD with rust or OE type replacement. inside and outside dimensions are different and...
bleed the clutch, maybe replace the soft line. if it's ballooning it'll eat up the clutch movement.
you should see the options we had for a chevy (same joint for 9/10 of rwd vehicles for 30-40 years) where I worked. just as many. comes down to...
look up in the FSM the resistance/temperature curve the sender should have. Does it read hot when you first start the engine? if the gauge moves...
GET NEW BOLTS. IIRC toyota says replace the flywheel bolts whenever they're removed. ARP makes aftermarket ones for toyotas (I used ones...
look for the earlier gen. 82-88 or whatever. monroe (don't know about others) doesn't make them for 89-95. the earlier ones are 1" shorter max...
no cat+ cherry bomb=suck. halfway between a fart-can civic and a cessna. not super loud but annoying without sounding particularly good. Thank you...
if there is "little" play, replace the parts with play. If there's "zero" play, look elsewhere. bad anything (ball joints, tie rods, idler arm,...
the drama isn't what drove me out, it was the lack of job security. Even the most established venue or company can have a rough season (or bad...
^ correct. you need the 5 wire to 4 wire converter box to have a 4 wire trailer plug. our trucks don't combine the brake and turn lights. Most...
Spools and welded diff are both illegal on the road in most civilized places. It certainly won't pass any safety inspection. Reason being that it...
Yea, my other toys 1990 Cressida [IMG] got a new heart and blew the trans :( (sitting in moms garage) 1977 Suzuki GS400 [IMG] accident last...
I'm Russell. I realized the other day that I finished drivers ed 10 years ago (IE I'm 26). I'm still going to school: 4 years tech theater,...
hehe, something I haven't seen mentioned yet is that the 22re idle control valve bolts to the throttle body. 5M and 7M bolt the (electric) IAC to...
Exactly. maybe 9 out of 10 people CAN weld decently and do a good job but that one guy grenading the diff sending shrapnel in all directions makes...
TEST THE ACTUAL OUTPUT OF THE ALTERNATOR AND BATTERY. yes, I'm yelling. Telling us you're a dealer tech then not wanting to properly test systems...
approximate. 7 is between 5 and 8 but closer to 8. 5 is stock, 7 is suggested for a little extra oomph. Mines around 10 I think (given cold...
Separate names with a comma.
