shouldn't have one on an 89+ AFAIK. if you've got one under the cab before the cat, that IS the front O2 sensor. rear O2 sensor is AFTER the cat...
oh, second piece of advice: pull a wheel off and look at the pads, maybe with a ruler and sketch pad or camera. 2wd/4wd/1t brake pads are all VERY...
Mine separates from the rest of the harness by the intake, goes down along the transmission, splits to the reverse switch, then to the O2 sensor.
fusible links aren't going to be hidden all over, it will only be in the alternator-battery wire and the battery-fuse box wire unless someone's...
the one time I saw a 1 ton it had quite a few more leaves in the pack than my 1/2 ton. IMO for stuff like brakes, it's better to get them from a...
I've noticed the truck doesn't have a whole lot of self-centering. Did it self-center before? any other mods/work done?
why do you want to know?
Find a wiring diagram and plug picture set from the TSRM (Sorry, can't help there). You'll probably have to trace pins/wires yourself....
you're shipping a 6' long, 2 foot wide box, what do you expect?! next best bet is watching craigslist near you for one
+1 for make clearer posts using some semblance of English and grammar. I've heard of the steering stops making clicking/squeaking noises too....
I know the rear O2 sensor isn't the only difference. you may or may not have to change the whole harness.
he means to go from the idiot light to the gauge, and yes you will need a new one. auto parts stores should have it.
it'll change it a little but you probably won't notice between the cat and the n1. As far as the spacing, ask them to show you why they think it...
How much for the center mirror, shipped to 62901?
you can't kink it and cut off the flow of electricity like you can water in the garden hose. BUT if you kink it and makes a thin spot on the wire...
This has been fixed BTW. no longer need it.
230k, got it at 220k. I've done clutch, radiator, and timing set as far as engine stuff. I doubt much of anything was done before that. it may or...
1. mount the O2 sensor at least horizontal, preferably at a slight downward angle so condensation can drip out. at least that's what my...
LOL ouch. what's up with the U-bolt there? can you spin the pipe any? course it wouldn't help much since the O2 sensor should be pointed slightly...
slipping isn't an electronics problem. you can try changing fluid/filter but figure on the damage being done and that'll only extend it's suffering.
Separate names with a comma.
