Seems like that's how it goes around here. Luckily there are still trucks out there worth buying
Welcome back bro. What happened to the old truck?
"Engine braking" is something i'll do when i need to stop faster. Brake pads are easier to replace than a clutch. Ive learned to look ahead far...
If you can figure out the wiring from the stock harness then yes i assume you can keep the stock ecu. I believe most might go aftermarket because...
Its so cool that you have all the tool necessary to get stuff like this done.
Physically it should be a similar install of a 3RZ to a newer pickup since im sure you have a 20R. Tranny mount will more than likely need to be...
Get a cheap tach, Auto Gage is the cheaper option from Auto Meter, quality seems good. it's difficult to say how you should drive your truck, i...
Well if its supposed to go to the block then its a ground
How is your wire from the alt to the battery? You may have to track down the charge light wire and see if its shorted. It turns on when one end...
Do you have a multimeter? May need to start testing for continuity to the fuse box right there.
Not sure what the 4 speed looks Like but you can always measure and compare. If the length of the trans is the same then the driveshaft is fine....
You can change over to longer studs to add a spacer. Otherwise you can do some reverse mathification and measure where things will be based on the...
If you have an 18x8 +35 and you have .75" clearance around the BJs. Then in theory you should have .25" clearance with the 17x8 +35 Because you're...
Are you checking for clearances with the suspension at full droop or is it loaded while you check? Theres a thread on here with wheel...
Welcome to TM truck looks good
Been tossing around the idea of body working the truck so i Went out to the back yard yesterday and dug out the spare parts i have. Realized im...
BMW "ellipsoids" off an older 5 series. Takes some massaging to the headlight bezel and core support but they're awesome. Been running mine with...
Spend the money and the a good retrofit of a projector into a 5x7 housing. LED bulbs and you're set
Cant stand people driving around with their Fckin high beams on.
Not many places available for mounting in these that hide the light aside from the grille. whatever you do just dont be the asshole that drives...
Separate names with a comma.
