I would pay for it if I could find a decent 79-83 cab. No problem.
No problem. And since it fits the early booster, means it would fit the stock booster on your truck. You don't really need it unless you are going...
Its a 1" bore, like I said. You use the MC, not the booster. Their booster is huge, like 11".
Use a T5 froma 5.0. Strong and plentiful, easy to find and usually cheap.
79-83 has an 8.1" booster. Bolts to the stock booster and pedal on 84-88 trucks. Bolts to stock master on 89-95 but push rod needs to be modified....
I like using these: Poly Performance JEEP/TRUCK & BUGGY :: Battery & Accessories :: Accessories & Hold Downs :: Synergy Suspension Optima 34/78...
I still say on boost you don't need a "big cam", you just need one that is designed for boost. You wont really gain anything putting the biggest...
Taco is really cool, and super clean job on the sub box.
No thats the R Racing sticker.
http://www.toyotaminis.com/forum/suspension-chassis-54/drop-spindles-83-a-9372/
Here is the turbo rebuilt with new internals and converted to a carbon seal. [IMG]
That hump on the control arm can be trimmed off, in order to flip the balljoints upside down. I don't like the balljoint flip, where you put the...
Try eBay, I bought the hub centric Lexus/Toyota type for like $25 for a full set since I lost my OEM ones at some point.
The fuel would only sit stagnant when the vehicle is not running, the same as in the intake directly below the carb on a stock setup. And the...
You can absolutely run an intercooler with blow through. You can't run one with draw through because the air fuel mix is too dense to consistently...
I was going to run the 32/36. But I may run a Holley 2 barrel built for draw through. They are $400-500, and very simple to tune. Everything can...
And slowly collecting some old school audio for the truck. Customer built me a box to exact recommended space. Its super shallow, so I had to go...
We can do it at the same time and bounce ideas off of each other for problems and solutions. Lol. I should get a lot of experience with what works...
What do you want to know about it? I have another T3, and plan on building a setup for my truck. But not yet, I need to get it running and do...
Depends on the width. I have 7" wide with +35 and they cut it pretty close. Even on my red truck, same wheels with a narrowed 90s clip, they have...
Separate names with a comma.
