nope removed all that crap.......... that stuff didn't do anything (probably broken). Both vsv's gone, bsv gone, metal vaccum lines gone, egr...
yes sir here's some teasers..... BEFORE: [IMG] AFTER (ignore the nasty paint from the previous owner of the intake. I cleaned the inside...
all up inside what? the head or intake manifold?
btw this swap is virutally no work..........longest part was cleaning up the new intake manifold and throttle body. Could do this in less than 1hr...
my 4runner has a new motor (along with clutch, starter, ignition components etc) with oversized intake and exhaust valves, crane cam, 9.5:1...
does the 20r valve cover work on a late model 22re?
that would be bad though............. then you could always grind down the toy part and your valve cover could just say yoda
ok well it's all done minus a few things like relocating my fuel filter (was mounted on my old intake manifold) and bending the intake support so...
got the tps on and adjusted........kind of a bitch lol!
looking good love the color ;)
ya that site has some good info, but no one really shows the installation step by step. I'll be taking pics the whole way through.......
Doing a late model intake plenum swap on my 4runner today, anyone interested in a write up?
ok now that tan truck is fricken bad.............gotta love the matching wheeling trailer. That is sweet.....lava's gotta tear up some tires I...
ya it's about 10 min from my house......... can go shooting and wheeling up there, although I don't do the wet wheeling so much since that...
I hit that "ankle deep" water (actually up to my grille in other spots) going 25mph across the meadow before the pond, prior to where the truck...
the diff is at virtually stock height ie the lowest part of the vehicle.......... guess I found a way to get everyone's panties in a bunch...
Ground clearance is measured from the lowest point on a truck..... taller tires give you clearance not lift therefor with 33" tires they have...
sweet! jz swap > bags
yup computer reduces fuel to the injectors when the brake is applied to save gas
so they should be building ifs, lower center of gravity, lots of suspension travel.... not tippy, jacked up, solid axled, weak suspension...
Separate names with a comma.
