I have a 90 22r 4 spd and it has a 8"rear end with 3.07 gear ratio. I have no idea if that's right or I completely read the numbers on the inside...
I also had a 3.0 2WD but all the research i did prior buying some suggested it was like installing long stacks on a 22r. So you might have to...
In my old x-cab I had a single 12 in a sealed box with three amps under the back seats in the tool compartment. Not very good cooling!
Just a few months ago i got my second x-cab, but as for sounds all i ever had we're some alright door speakers the 2 1/2 in the dash and a sub or...
Well thanks for all the advise guys, but in the end we ended up hitting it with a 1 in impact gun! Broke the head bolt right the **** off, now I'm...
If it be done RB26 DETT from Gtr 34 with the 6 speed AWD TRANS and diffs!
Here a good trick my friend tought me for keeping the motor from turning in the truck, it's call the rope trick Take out the number one spark...
Ya tried that one to, was a lil scary but no dice! Let me just note this truck has been in Guam it's whole life, if that gives you an idea of the...
So here's my problem I have a 91 22R, the crank pulley that drives the alternator fell off the main harmonic balencer. Well trying to replace the...
When I pump the clutch that when it starts to sink, not when I'm holding down on it! I DONT KNOW I'm still thinks a Master Cylinder
I have a 91 with a clutch that fades to the floor a d doesn't engage the clutch. Now at first I thought it might be the master cylinder but it is...
Sorry bro don't know where you can buy one, I got mine from a bomb dump I worked in. IYAAYAS
Thanks bro always heard about this but never seen step by step direction. Super easy to follow, and great pictures!
I filled it with epoxy drilled a hole slightly smaller then the shaft once it hardened and found a tap that matched the threads for the shaft.
For all you gun lovers here a brass 30 mm round fired from a A10 I made into a shift knob![ATTACH]
Thanks guys for all the good info!
Haven't seen much of this but I was wondering if anybody had an idea about swapping axles and front knuckles from a 4wd truck to a 2wd. Mostly...
I have done this basic drop lots of times on my trucks and with 17in rims you can pretty much lower it enough to cover the top of your tread in...
Semi bro, not trying build a drag truck just make it nicer then it is now. For now just looking to do some small mods, cam, gears in the rear, and...
I grew up in Portland, PIR for mid night drags! I used to get most stock and body parts from the Toyota guy don't know if he's still there but he...
Separate names with a comma.
