could be a bent 3-4 fork, shift rod, or the syncros.
ya. the threads always strip out. especially the last lower rear one. i had 3 on my head that were bad. just jam in a time sert. one and done.
:bow::thinking::verdict_in::waytogo: nice!!! mind blown!!!
look for the early 3s-gte. u can always upgrade the turbo to a slightly larger one (has more available aftermarket parts) while still running the...
i prob have about an easy $3000 in motor, drivetrain, and suspension. and i havent even touched the block yet. almost half the cost of what i...
just swap in a 3s-gte!! and u get boost! same 4 banger gas-sipping mpg's. and u dont gotta molest the engine compartment, front support, and the...
i would do: 22r laser block, decked 22r early head (hemi chamber, square intake ports, round exhaust ports) shaved way down w MLS gasket....
.... whats a smog? ....I recon its a small hog! lmao Beverly Hill Billys
.... also, maybe run a tank of 91 octane fuel, or dump some SeaFoam in with a full tank. and half a bottle with the engine oil. its the first...
:funnyup::waytogo:
i wouldnt trust the "chinese cracker jack pot-cast" heads. if u plan to run the truck for a few more years and have it bullet-proof, invest in a...
85 PSI??!! HOLY BACONBITS BATMAN!! jeez thats high. ...i wouldnt rule out ecu overheat/failure or same for the ignitor/coil. i think thats whats...
im pretty sure the pre-91 trucks had knock sensors. my truck (94) didnt have one. and neither did the ECU from a 91. i have other older ECU's (3...
grinding a little or a lot, longer bolts, steel plate "shim" ..... or just wrap the torsion bar and be done? i like the header as well, and LCE...
when i got my LCE street header, it was hitting. i called them up, they had me replace all my engine and tranny mounts- was still hitting. then...
i did this to mine. the rear fenders have 2 inner support brackets. if u look closely, the part that bolts to the upper section has another bolt...
ya, sounds like fuel delivery is clogging up. maybe try change filter and get some seafoam in the tank or some type of fuel additive/cleaner.
:confused: :thinking: :shrug: :runaway:
make sure the dizzy isnt 180 out. that happened to my friend -after getting engine back from machine shop, they assembled the rest of the parts...
raise the torsions up a little bit
Separate names with a comma.
