More than 3 inches: [IMG]
18x8.5 +35 (old setup) [IMG]
^^ I got all my stuff from Summit. Not much of a selection locally anyway for me. The MSD unit doesn't "kick in"; it's always active. The...
Trays is local slang over there I guess? It's all good; it's just that the only ones I see are beat up work trucks. I guess it's up to you to...
I had no idea what you were even talking about until I saw the pictures. Is that some sort of Australian thing? Flatbed conversions as a fashion...
You can, but it will ride a little better if you cut them down and put them back so the control arm is not crashing on the frame every time you...
I'm another big Forza fan. I have just as much fun building/tuning my cars as I do racing them. My paintjobs are a little simpler than the...
That's a big YES on the will it rub question. I had 225/40's on my 18's before....
Why bother with a mechanical pump? There's no need to go through all the work of dropping the tank and removing the stock electric pump (unless...
I had that TRD cam before; slightly lumpy idle, good midrange and big top end improvement. It got in the juicy part of the powerband around 3000...
Depends on the offset of the wheel also.
18x8.5 w/225/40 tires. A little bit of stretch. Offset was +35 if I remember correctly: [IMG] Clearance was tight, but they fit with some...
Checkers I think. Napa usually has the same fans too.
Wow, nice work on the manifold. :waytogo:
Haven't done too much lately, but I finally put in my electric fan. No more belt squeak, yay! :) [IMG] Its 15", fits the radiator...
I never noticed any difference before and after my sidedraft manifold and blocking off all the extra coolant and heater ports. It runs cooler if...
Bleeding the brakes can be a pretty messy and irritating job without a good tool to do it. Here's the brake bleeder I have:...
I don't quite see where all this "LC motors are overpriced" talk comes from. Overpriced compared to what? Motors aren't cheap. 22R performance...
^^ My setup isn't quite as nuts as that, but the MSD 6AL and Blaster coil have been working good for me. I also run both my distributor and cam...
Kekaha? For a second there I thought I could drive down the street and score some sweet parts! Too bad you aren't here any more; otherwise I'd...
Separate names with a comma.
