Good catch. Nice work so far. Should be good to go when it's re-plated. There was quite a bit of rust debris inside that rail! I've done this same...
The same cams fit the 20R/22R/22RE & 22RET. The 20R head will increase his compression ratio though. :waytogo:
Xs55875: It may be confusing but it's proper info. Besides, the OP can't expect someone to make his decision for him. He needs to educate...
Desktop dyno numbers from Gnarly4X on Pirate..... 22RE – Stock, Doug Thorley header, opened exhaust (2” to 2.25”) EB261C – Duration @ .050” =...
Bartered back and forth and ended up scoring some chrome 100 spoke radial laced Dayton's. They need some elbow grease but there's plenty of time...
:headbang::waytogo::waytogo::waytogo:
I got a new rag for the joint, to rebuild mine, in the "Help" section at the local parts store. The help section is prepackaged parts that hang on...
Nice build man! Dig the wheeler!
Used my Humper truck to haul a load yesterday. Guy said it was the easiest truck he's ever loaded a cart in to. lolZ! It did fine. The belltech 3"...
NICE!:waytogo:
Don't really need the clock but I would like to see the SR5 maplight set up. If it's the rear view mirror/light assembly and the mirror is tight,...
No links, you'll just need one ladder bar. I've seen them made to where they fit right next to the drive shaft and use the diff bolts to attach to...
IF you're having a hard time finding a older Toyota something, call Dave. https://www.davezoffroadperformance.com/store/ He sells vendor items...
A ladder bar is a 3 point brace that allows the axle to articulate in it's normal range of travel but keeps pinion angle. 2 points on axle...
Been slow the last couple weeks. Last weekend I dropped the trans and swapped the clutch, pilot & t/o bearing. Did the rear main, front trans...
Condolences man.....loosing a best friend sucks!
Once the contacts wear down a bit, there's too much space for the magnetic field to work....so Truck Action's fix of considerably increasing the...
With the miles on your truck and the symptoms you describe, I suspect your starter contacts are worn and need replacing. You can get them from the...
Yes, it's true. You want to use it for roughly 400 miles of easy stop & go driving (not highway miles), using the clutch as much as possible while...
:thinking: The stock arm/hinge is designed to work within the stock range of suspension travel. When that range is changed, factory purposing is...
Separate names with a comma.
