If there's one thing I'm learning, reading this forum, it's that anything works if you want it to badly enough. :headbang:
What's the state of the tranny lube? Could this also be a synchro issue?
I've heard of 2x4s being used for leaf springs, but I think this might take a little more than that. :D
So: If the seats are trashed, the brackets on the bottom are still worth something?
Just tried it in the slush with the 225s on the front and the studded 215s on the back. Not bad. I think I'll just leave it like that.
Stinkbug effect??
If I put 215/70R14's on the back and 185/70R14's on the front, what kind of handling changes should I expect? I've only got two of the 215...
[IMG] [IMG] You mean like this one? This is from my '86 parts truck. Note that what's on top in the picture of the front is on the bottom in...
Slow SR5, my Jedi skills are no match for that kind of wizardry. I'm reading that thread in awe. For the moment, that kind of work is what I'm...
How does this differ from the lhd pump?
I just saw this on Craig's List. [img] Look at that: The horizontal crack about an inch from the bottom of the frame, running for a couple...
So I'm reading through older threads, and I assume you aren't still under the truck in the rain. How did this turn out? My first thought is that...
I bought a parts truck ('86) with a good 22R and a W55 (I think) for $500. Of course these are parts to have on hand in case the 22RE in the good...
Nope. New O-rings. I bought multiple sets of spares. Interestingly, the different sets are different sizes, which means one set is for the...
How does all that drop work treat the windshield?
Roger that. This time, that's the case. I just had it apart again and replaced the #2 O-ring this afternoon.
I replaced my injectors. My truck had mostly sat for 7 years before I bought it, and the injectors ran really rough. So I got re-manufactured...
They say the most important thing is to adjust the nut behind the wheel.
I'd love to see step by step pictures of the third member swap process. I've got a 4.300 8" 1-ton rear. I'd love to have a 3.900 or 3.73 to give...
Separate names with a comma.
