:eek: wow. Hope she`s ok. Sucks to lose a drivable truck but looks like reason for engine build/swap.
Yes it can, the spacers are not required. They are only used to get additional drop. Mine is currently done without the spacers.
That's cool. I was gonna say, I have a step bumper off an 85 you could have for shipping. Guess you won't be needing it. Love that my truck...
I didn't do a pre and post measurement so not terribly sure how much I got. I did take the washers out before I put the spindle on. Wish I...
Lately it's been the "New and Improved" software I use for work. It was obviously written by someone who has never done my job and approved by...
Sweet score. Love the powder blue with patina. I'd flat clear it, maybe paint the wheels to match or keep black and keep the white walls.
I have the DJM's on my 85 using Moog stock replacement ball joints. Only thing is, I believe there was a longer bolt included with the DJM's,...
I'm looking for a close up pic of how exactly the valance mounts to the 1 piece bumper on an 87. This is the mount around the side of the bumper....
I don't know if there would really be a difference. I guess the spindle is the more minor change. It just raises the mounting shaft that the...
Considering they are the same generation (88-97) I would assume it would. I put an 87 grille and bumper on my 85, bolted right up. Same...
If you want 3 inches in the front you can get the DJM lower control arms. 1988 – 1996 Toyota Pick UP | DJM Suspension | DJM Suspension Or you...
Yea, I considered it, but I like the more streamline look of the 2wd ones. Plus If I did the fenders, I'd have to find a 4wd bed to match the...
If I could run a larger diameter rim, like a 17 this wouldn't be a problem cause all the suspension would fit inside the rim. Only problem the...
My 14x6 rub with +25mm offset. If I get a 15x7 and do same offset, I'll stick out another half inch, which wont tuck. This is the reason I need...
I'm down a good 6 inches in the front. Have the DJM LCAs(3) Belltech spindles(2) and BJ flip(1) The back will be down 7 when I get my blocks...
If your looking for smoothies, these guys custom make them. Hot Rod Steel Wheels theWheelsmith - Smoothie Wheels and Accessories
Yea, my tire is actually tucked up inside the fender by about 2 inches. The spindles did it. LCA and BJ flip I was sitting about where you are...
maybe I calculated the offset wrong. It's a 7 inch rim, with 5.5 inches of backspacing which I calculated, according to a formula from the...
I crawled under there yesterday, not easy sitting this low. Won't have a problem with the ball joint, since I did the BJ flip they tuck inside my...
I don't have them yet. I'll double check the BJ spacing.
Separate names with a comma.
