Well, I'm sure your aware, not all 1000 watts are the same. Look for RMS power at 12 volts. That'll be your true power. Most amps are rated at...
Ok, I was wrong, but not sure where your finding spindles for $600. autopartswarehouse has the DJM control arms for $220 and the belltech...
Sorry for the late response, I was out on vaca with the fam. I painted the bolts but not the threads, until it was all together. If you paint it...
Really wish Dallas had some good shows.
If you're just wondering how close your cat will be to the ground, measure it at current ride hieght then subtract 5 inches, I know, thats the...
Something I thought of for spacers, and wish I'd read up on when I rebuilt my front end and threw them away :verdict_in:, is if you can get an old...
I fought with a similar issue a couple summers ago. I'd completely rebuilt the rear brakes and the rears kept locking up. Everything was in...
Measure the ride difference between front and back as it sits now. Guessing you'll do good to get 1.5 inches out of BJ flip. So depending on...
yea, probably. Trying to keep the sleek look though. I think I finally have my wheel measurements figured out, so just need to get them ordered....
Yea, I have spindles, LCAs and did the BJ flip. Yes my stock 14" wheels rub. I've read/been told that removing the plastic inner fender well and...
I havn't hauled anything since I put the blocks on. But if you keep stock springs and just add blocks and notches your load capacity shouldn't...
Smooth lookin truck and scenery. Digging the white on white. Second thing, I ask everyone with your year range truck and yet to get a reply....
I've got 3" belltech lowered leafs, and 4" blocks on my 85 longbed and haven't touched the driveshaft length.
About the only way I'll get any lower, is with a 4 link and bags. Some day, maybe, someday.
Yw, So the nut was off? Just the bolt stuck? That sucks. Mine slid right out once I had the nut and torque arm off. :waytogo:
I have dropped leaf's and 4" blocks on my 85. I used streetaco's weld in c-notch and have plenty of clearance with a good 7 inches of drop.
Did you remove the little arm on the backside of the control arm(called the torque arm)? This is the arm that the torsion bar goes into. If so,...
Switched out my slider for a solid back glass. Then went off to the tint shop! [IMG]
That's a slick looking truck REDZ. What's with the headlights? They look like eyes!
I was actually thinking of just that this afternoon when I was getting something out of my truck on passenger side, and thought, what would it...
Separate names with a comma.
