yep....liking the header....a lot.....brand?
Trail Boss Bulletproof Motor Mounts Installed these today, significantly reduced engine vibration. Total install time, one man, hand tools, 2...
better photos without the shell. I am pleased with the wheels/tires
I need a bed part, the lower area forward of the fuel filler door (the part that is permetexed on), and closest to the body, but sadly would need...
RAV 4 Wheels Part three All wheels installed. With the one inch spacer, the offset is perfect, and the wheel tire combination completely change...
RAV4 Wheels Part two One inch spacer installed (perfect size, well pleased), wheels for comparison, and the first RAV 4 wheel installed (205/65/16).
RAV4 Wheels Part one This series is "before" showing the 185/70/14s on Keystone Classic Wheels. I really couldn't stand the wheels, and wanted to...
Angelos has one (complete) on a junker (850)232-2801 or did last week. I am not affiliated, but I do shop there. It is likely cruddy, but serviceable.
I have a 2003 Mini Cooper S that I have taken from stock 168hp to 240hp on the dyno. It is a blast, and still returns a combined 30mpg.
take some cardboard, build an extender template and take it to a fab shop to be replacated in mild steel
The more I am looking at it, the more i am thinking of adding a turbo to my 22R, with the 3.07 rear. Okay, not as sexy or as trick (or as...
Very close on the RAV 4 16x6 wheels. Will be using 1 inch spacers and 205-65-16 tires. This should knock a couple of hundred RPM (170 or so) off...
I know where the steering wheel,and the vent glass can be had if they are still there. Angelos Recycling at (850) 232-2801. They are closed...
I will let you know when I am at it. Right now, I am working the exhaust (moving to a 2.5) Gozoutta first, then Gozinta.
Going to...haven't yet. I think I am going to move the battery and put it there
Stating up front that I am not the traditional builder here (wont lower, want mad fuel capacity and quiet interior), I have had some good success...
Or, you could move to Florida, we have no inspections at all....none. We also don't have state taxes, but it is buggy and humid.
I am considering a 3.07 as well, but am holding out to see the impact of the wheels/tires first. The 3.42 was too conservative, I know that much.
I changed my 5 speed 80 4x2 from the 4.10 to the 3.42. It helped some, but not as much as I wanted. You may want to look at a 3.08, if you want to...
There are two, one is a dualy camper (toyota cab front, one ton frame) the other is out and laying near the springs.
Separate names with a comma.
