The plugs were like $6 a piece. You could just hook the high beam wire for the 4runner lights to the low beam power wire. Don't hook both up...
Gotta use plugs for the 4 runner. But they are just generic 9004 bulbs sockets. I bought mine at Napa.
Nothing. 3 wires. I used a test light to find which was which. I think the low beam was the middle one on both the old and new plug. Then one...
Came out nice.
Pics aren't working. Did you get my pm?
Oh, and my tires are 3/4 onb inch taller than stock. Whatever that equates to. I made that pull in 5th gear from 75mph.
After reading this I got to wondering. I did my brakes last week and just got an alignment. I pulled this with a stock 92 2wd, 230,000 on the...
Thats why I didn't use the core support. Too pricey. Figured I try to see if I could fit it first.
You can buy small pieces of 20 ga steel at lowes and homedepot
YOu should be able to use the dash, seats, headlights and grille if you want, fenders. What kind of condition is it in? I could use some parts,...
It wasn't that bad at all. I'm working on the write-up but I need more pics. I'm going to take it apart again to fix a few things, and take more...
Teaser Pics. I'm working on the how to. I used 4 runner headlights, grille, fenders, bumper, and corner lights. Semi-stock core support. -Ryan...
z A frame z on a toyota is when you raise the section of the frame the engine and suspension are mounted to. The crossmember and lower control...
With some guidance from rwmagee90 I cut the passenger side last night. Light fits well. I'm going to clean up the cuts and post pics of doing...
I'm running two Viair 450's on a 12 gallon tank on my 72 Chevy. Its slow to fill from empty. I worked very hard to get rid of all the leaks so...
I get most of my parts from rockauto.com Didnt look up their price tho. Try a U-Pull it
I'll tell you my plans to bag mine. Most importantly I would recomend a forward 4link. A reverse will get you low and ride fine, but the...
My truck had the same problem. 92 2wd 5 spd. I got another axle and ended up just swapping the center chunk.
Glad to see another Louisiana Ride! Looks good. I see you're a 5-spd, did you relocate the clutch master? And how close are the wheels to it?
word, lets hear it
Separate names with a comma.
