Does anyone know how to strengthen the strut rod mount while still fitting the radiator. My mount is right where my coolant hose needs to be....
What does everyone do with the strut rod mounts on the front when doing a bodydrop? I cut mine off about where I cut the frame and was going...
They've been installed for a while, they're just out while I do the bodydrop. I'll shoot some pics when I put them back in.
I payed a guy from yotascene on Christmas day last year and he has yet to provide anything other than false promises. I'm an easy going guy, but...
Yes, I'm using stock arms upper and lower. Lowers were cut and plated for the bags. I only had to rework the trans tunnel where it met the...
worky worky So its been a while but I finally worked on it. I got the trans tunnel worked out, just have a few bits to finish welding. Then I...
I've also found that you are more likely to get pulled over with primer spots or with primered/flat paint. Everytime I get stopped its pretty...
I found some weird info. My axle code is A01A which was referenced as a later model code in other sites. Also my trans is a W55. My truck is...
Another update. Got the driver's side mostly finished. Made way for the wiring and put the engine in for ****s and giggles. It'll come out...
Well I put in about 5 hrs after work today. Got the driver's side cut and moved the clutch (Finally...). So here's the pics: First off...
Thanks Thanks guys! The nice comments are what keeps me going!
That would be awesome!
I trimmed my core support to my 4 runner head lights in and cut one of the mounts off the grille cause it hit something. Moved horn and used 3/8...
Bump, Can you post a pic of the trimming of the control arm for the steering shaft?
If I remember correctly the way the brackets bolt to the bumper is completely different. Not even close. I had trouble getting my 4x4 bumper to...
302 should be an easy fit. I'm putting a Chevy small block in mine with stock trans and rear end. Everyone says it'll blow the trans, or rear...
More updates. Got the floor finished. Need to finish welding the back wall, and do the cab supports underneath. Does anyone have pics of...
Progress, Progress, Progress. Cab was cut Monday. Welded back of cab and firewall Tuesday along with fitting A/C back in. Wednesday welded up...
I would get an adjustable cam gear and degree the cam the right way. With a degree wheel. There is lots of potential for power have the cam...
This thread is ridiculously long:(. You guys should provide a summary for us newcomers just catching on. Or are you guys post whores:eek:?
Separate names with a comma.
