Or for what it's worth you can use a Tacoma Steering rack in front of the wheels and it will turn the right way and be RHD. Tacos are usually LHD...
Oh, I took the idler and just mounted it on the left side. Two of the holes lined up, 1 didn't since it was backwards. Then I drilled it and put...
The front cap came off a 4runner. Except hood. Hoods are all the same.
They are. Stratus/Eclipse. All the same.
Ditch the EGR, I did on my 22re. Still ran fine. I ended up stretching the harness to get the steering on right and a/c on left. I should have...
I'm looking for a 8" 2wd housing and axles. I have a 4.30 Electric Locking TRD center chunk I want to drop in. But it would be nice to have the...
I've been working on finishing up the core support so I can start this puppy. Also picked up some ebizzle parts. Vents to glass into my dash for...
Where did you get the RHD clip? I got my steering box from Australia and made the firewall, but I don't have any of the interior parts. I've...
I've used the rattle can stuff with success. Or you can use a good etch primer and base clear the engine. But anything you paint that's aluminum...
They are just trailer fenders. I bought them from a local trailer supply place.
Man yall are getting screwed. I got my 92 Liability Only with State Farm for like $300 for 6 months. I'm about to change it to agreed value when...
Newest updates. Engine is in and intake on. I need to polish up my new valve covers and get them on. Hoping to have it running for next week....
I used advance adapters bellhousing and clutch disc. 153 tooth chevy flywheel, mini starter, and 10.5 or 11" pressure plate. FJ40 slave...
I didn't bother painting the valance I have because I would like to swap to another bumper. I actually have an 04 coresupport, grille, 1 corner...
The rims are Centerline Smoothies. 20x8.5 and 22x9. I have a jig that centers the axle mounting flange with the center carrier. I had a...
Thanks! :waytogo:
Well Bernie lives in Az, I live in Louisiana. Its usually humid fires won't start, lol. As best as we can determine the fuel pump pressure...
And that catches us up to now. I dropped the new engine in last night. I made the new engine harness and modified the interior harness. I'm...
Painted intake and firewall and put wheeltubs in. Paint is ok for being done in the garage, got a little trash and some orange peal but I'm going...
Told my girlfriend we were going a date. Then we sawed the windshield out with welding wire. She wasn't as happy as me, lol. And removed front...
Separate names with a comma.
