I know what you mean. I have an '80 with a 5-speed and stock 4:10's in the back. it spins like 3000rpm at 60. Above that it seems to make more...
Tuned the Weber today, finally. I just slapped the thing on there when I got it, to make sure it ran and to make sure my old one was crap, so I...
Wondering when my truck turned in to a 4x4. :shrug: I need those blocks in there NOW, don't I???? :verdict_in:
yea but the fuel in the bowl won't heat up. The carb being isolated from the intake keeps the air temps and fuel temps down. Plus the longer...
Holley 5200 or Weber 32/36, they just didn't do the title well. They have the same bolt pattern. And i think the 20/22R carb mount is the same....
OK, what do you guys think, what difference would installing this make torque wise? Worth $50+ shipping? I've used them on V8's before but I...
Dropped to $20. Anyone? I figured these things would actually be in demand... mine seems to work fine (2-piece)! :shrug:
Yea that's what I've heard, they come loose and that's when you have troubles. I would just install them, drive on 'em for a while and then get...
Figures! No Pep Boys near here. There's Autozone and O'Reillys, and from what I've seen before they don't have anything remotely like it. They...
If I could afford his stuff I would have already grabbed it, unfortunately. I was just wondering about them since they're only $50, could slap...
Well next weekend I'm giving it a shot, if not I'm probably either going with blocks until i can afford springs or just leave 'em alone. I've...
80-96 Toyota Pickup Truck 3 Inch Rear Lowering Kit 6200 | eBay Looks like aluminum blocks to me. just wondering. Decent price though.
OK quick question. Idle jet is in the accelerator pump housing? Plus I only have one jet from what I can tell, the opposite side has a cast...
OK, was going to tackle this soon, and needed to ask a quick question. You mentioned clamps on the leaf springs, well here are what I have on...
My truck is new again!!! Well, I wish that's how it worked... :D
Drove it to work with the new Weber and the linkage set up correctly. It's so much quieter now I can hear other stuff making weird noises. I...
Weber installed, put stock linkage back, works great. Except... at full throttle, the linkage sticks. So now I know why there is a spring...
Here's some pics from my setup today. Works great, the clip on the swing arm is just a push pin, probably find one at the hardware store easy.
went thru my parts last night and found the clip. Like a double U clip. I'll post a pic of the whole linkage put together later when I'm done.
Yea, that's what I was wondering myself, is there something there stock to keep that end of the linkage from popping out? Is there a stock clip...
Separate names with a comma.
